AVR-P28N-8MHz Olimex Ltd., AVR-P28N-8MHz Datasheet - Page 5

• Manufacturer Part Number: AVR-P28N-8MHz
• Description: MCU, MPU & DSP Development Tools PROTOTYPE BRD FOR STK200 28PIN
• Manufacturer: Olimex Ltd.

Specifications of AVR-P28N-8MHz

• Processor To Be Evaluated: AVR-PG1, AVR-PG2
• Data Bus Width: 8 bit
• Interface Type: RS-232
• Dimensions: 100 mm x 80 mm
• Operating Supply Voltage: 3.3 V, 5 V
• External Height: 80mm
• External Width: 100mm
• Mcu Supported Families: AVR
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1776315 52R3438 AVR-P28-8MHZ

JUMPER DESCRIPTION:
J1
LED_J
3.3V
WARNINGS!!!
1. The 3.3V jumper selects the power voltage to be 5V (open) or 3.3V (closed).
MAX232 can operate only at 5V power supply so if you are working with 3.3V you should replace it
with MAX3232 which works at 3.3V power supply.
INPUT/OUTPUT:
2. If you want to operate with 3,3V power supply, remove R7 resistor.
When this jumper is open – LED is not connected.
Microcontroller.
Default state is closed.
When this jumper is open – LM317 output is 5V DC.
When this jumper is closed – LM317 output is 3.3V DC.
Default state is open.
When 1-2 are shorted – RTS is connected to terminal pin RTS/DTR.
When 2-3 are shorted – DTR is connected to terminal pin RTS/DTR.
Default state is 1-2.
Status Led with name LED (red) – this led is connected to PIN28 (PC5/ADC5) via
jumper LED_J.
User button with name BUT - connected to PIN4 (PD2 / INT0 ).
Reset button with name RST - connected to PIN1 (RESET).
When this jumper is closed – LED is connected to pin 28 (PC5/ADC5) of the
Page 5