PC1S3052NTZF Sharp Microelectronics, PC1S3052NTZF Datasheet - Page 10

• Manufacturer Part Number: PC1S3052NTZF
• Description: Triac & SCR Output Optocouplers DIP6 Phototriac Non ZC 600V 10mA
• Manufacturer: Sharp Microelectronics

Specifications of PC1S3052NTZF

• Configuration: 1
• Maximum Continuous Output Current: 100 mA
• Maximum Input Current: 50 mA
• Maximum Operating Temperature: + 100 C
• Maximum Reverse Diode Voltage: 6 V
• Maximum Turn-on Time: 50 us
• Minimum Operating Temperature: - 30 C
• Output Type: AC
• Package / Case: PDIP-5
• Typical Input Voltage: 1.2 V
• Zero-crossing Circuit: No
• Output Device: Triac
• Isolation Voltage: 5 kV
• Peak Output Voltage (vdrm): 600 V
• Maximum Input Voltage: 1.4 V
• Maximum Output Voltage: 420 VAC
• Minimum Trigger Current: 10 mA (Max)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

■ Manufacturing Guidelines
● Soldering Method
Refl ow Soldering:
Flow Soldering :
Hand soldering
Other notice
Refl ow soldering should follow the temperature profi le shown below.
Soldering should not exceed the curve of temperature profi le and time.
Please don't solder more than twice.
Due to SHARP's double transfer mold construction submersion in flow solder bath is allowed under the
below listed guidelines.
Flow soldering should be completed below 270̊C and within 10s.
Preheating is within the bounds of 100 to 150̊C and 30 to 80s.
Please don't solder more than twice.
Hand soldering should be completed within 3s when the point of solder iron is below 400̊C.
Please don't solder more than twice.
Please test the soldering method in actual condition and make sure the soldering works fine, since
the impact on the junction between the device and PCB varies depending on the tooling and soldering
conditions.
(˚C)
300
200
100
0
0
Terminal : 260˚C peak
( package surface : 250˚C peak)
1
Preheat
150 to 180˚C, 120s or less
2
10
3
Reflow
220˚C or more, 60s or less
4
PC1S3052NTZF Series
(min)
Sheet No.: D2-A08801EN