E225SD1CBE C&K Components, E225SD1CBE Datasheet - Page 70

• Manufacturer Part Number: E225SD1CBE
• Description: SWITCH PB DPDT .4VA SEAL PC THRU
• Manufacturer: C&K Components
• Series: E020r
• Type: Standardr

Specifications of E225SD1CBE

• Circuit: DPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 0.4VA @ 20VAC/DC
• Actuator Type: Plunger
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Contact Form: DPDT
• Contact Rating: 0.4 Volt-Amp
• Actuator: Plunger
• Supply Voltage: 20 Volts
• Mounting Style: Through Hole
• Terminal Seal: Epoxy
• Contact Plating: Gold
• Contact Material: Gold
• Illumination: Not Illuminated
• Mounting Angle: Vertical
• Voltage Rating Ac: 20 Volts
• Voltage Rating Dc: 20 Volts
• Power Capacity (va): 0.4 Volt-Amp
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: *E225SD1CBE; CKN9862

Specifications
CONTACT RATING: Q contact material (8631, 8632 Models):
ELECTRICAL LIFE:
CONTACT RESISTANCE: Below 30 mΩ typ. initial @
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 65ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-72 and A-73. For additional options not shown in catalog, consult Customer Service Center.
Models Available
Features/Benefits
•
•
•
•
500 mA @ 120 V AC or 28 V DC; 250 mA @ 250 V AC;
(8633 Model): 250 mA @ 120 V AC or 28 V DC; 125 mA
@ 250 V AC. See page A-73 for additional ratings.
8631 and 8633 MODELS: 250,000 actuations at full load.
8632 MODEL: 100,000 actuations at full load.
2-4 V DC, 100 mA, for both silver and gold plated contacts.
EIA RS-186E method 9.
Available with overtravel
Normally closed models available
Microminiature size ideal for
applications where space is limited
RoHS compliant
Switch Function
8631
8632
8633
SPST Off-Mom.
SPST Off-Mom.
SPST On-Mom.
Typical Applications
•
•
•
Termination
Z
C
Contact Material
B
Q
G
Detection
Telecommunications and
networking equipment
Computers and peripherals
Solder lug
PC Thru-hole
Gold
Silver
Gold over silver
Microminiature Pushbutton Switches
A-71
Materials
CASE: Glass filled phenolic or diallyl phthalate (DAP), (UL94V-0).
PLUNGER: Glass filled nylon (UL94V-0), black standard.
BUSHING: Brass, nickel plated.
CONTACTS: Q contact material: Coin silver, silver plated.
TERMINALS:
TERMINAL SEAL:
HARDWARE: Nut: Brass, nickel plated.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
See page A-73 for additional contact materials.
8631, 8632 MODELS: Copper alloy, silver plated.
8633 MODEL: Q contact material: Coin silver.
See page A-73 for additional contact materials.
8633 MODEL: Epoxy.
8631, 8632 MODELS: Terminals insert molded.
Seal
D
E
Plunger Color
2
3
No epoxy
Epoxy
Black
Red
Specifications and dimensions subject to change
www.ck-components.com
Dimensions are shown: Inches (mm)
8600 Series
A