E225SD1CBE C&K Components, E225SD1CBE Datasheet - Page 66

• Manufacturer Part Number: E225SD1CBE
• Description: SWITCH PB DPDT .4VA SEAL PC THRU
• Manufacturer: C&K Components
• Series: E020r
• Type: Standardr

Specifications of E225SD1CBE

• Circuit: DPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 0.4VA @ 20VAC/DC
• Actuator Type: Plunger
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Contact Form: DPDT
• Contact Rating: 0.4 Volt-Amp
• Actuator: Plunger
• Supply Voltage: 20 Volts
• Mounting Style: Through Hole
• Terminal Seal: Epoxy
• Contact Plating: Gold
• Contact Material: Gold
• Illumination: Not Illuminated
• Mounting Angle: Vertical
• Voltage Rating Ac: 20 Volts
• Voltage Rating Dc: 20 Volts
• Power Capacity (va): 0.4 Volt-Amp
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: *E225SD1CBE; CKN9862

Features/Benefits
•
•
•
•
Specifications
CONTACT RATING: Q contact material (KM11, KM12 Models):
ELECTRICAL LIFE: 10,000 actuations min. at full load.
CONTACT RESISTANCE: Below 30 mΩ typ. initial @ 2-4 V DC,
INSULATION RESISTANCE: 10 9 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
CAP INSTALLATION FORCE: 10 lbs. max. permissible.
NOTE: Any models supplied with Q or B contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-68 and A-70. For additional options not shown in catalog, consult Customer Service Center.
Models Available
Reliable contact design
Available with pretravel
and overtravel
Extended overtravel option
RoHS compliant
0.25 AMPS @ 125 V AC or DC (UL); (KM33 Model): 1 AMP @
125 V AC or 28 V DC. See page A-69 for additional ratings.
100 mA, for both silver and gold plated contacts.
Switch Function
KM12
KM11
KM33
Actuator
02
01
.398" high, .122" dia. KM12
.122" dia. KM11,
Stepped, .108” dia. KM33
On-Mom., SPDT
Off-Mom., SPST, N.O.
On-Mom., SPST, N.C.
Bushing/Mounting Style
A
RR
Right angle
1/4-40 thread, .225" high
Typical Applications
•
•
•
Alarm systems
Computers
Detector switch application
Subminiature Pushbutton Switches
Terminations
05
08
02
A-67
Materials
HOUSING & BUSHING: 6/6 nylon (UL94V-2), black.
ACTUATOR: 6/6 nylon (UL 94V-2), natural. Internal o-ring seal,
MOVABLE CONTACT: B contact material: Bronze or copper,
STATIONARY CONTACTS & TERMINALS: B contact material:
RETURN SPRING: Music wire, phosphor coated.
MOUNTING NUT: Brass, nickel plated.
TERMINAL SEAL: Epoxy.
.110" quick connect
Right angle, PC thru-hole
PC Thru-hole
available on KM11 & KM33 models.
with gold plate over nickel plate. See page A-69 for
additional contact materials.
Copper, with gold plate over nickel plate. See page A-69 for
additional contact materials.
Contact Material
B
Q
Gold
Silver
Seal
NONE
E
Epoxy
Specifications and dimensions subject to change
No seal
www.ck-components.com
Dimensions are shown: Inches (mm)
KM Series
A