E225SD1CBE C&K Components, E225SD1CBE Datasheet - Page 14

• Manufacturer Part Number: E225SD1CBE
• Description: SWITCH PB DPDT .4VA SEAL PC THRU
• Manufacturer: C&K Components
• Series: E020r
• Type: Standardr

Specifications of E225SD1CBE

• Circuit: DPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 0.4VA @ 20VAC/DC
• Actuator Type: Plunger
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Contact Form: DPDT
• Contact Rating: 0.4 Volt-Amp
• Actuator: Plunger
• Supply Voltage: 20 Volts
• Mounting Style: Through Hole
• Terminal Seal: Epoxy
• Contact Plating: Gold
• Contact Material: Gold
• Illumination: Not Illuminated
• Mounting Angle: Vertical
• Voltage Rating Ac: 20 Volts
• Voltage Rating Dc: 20 Volts
• Power Capacity (va): 0.4 Volt-Amp
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: *E225SD1CBE; CKN9862

Features/Benefits
•
•
•
•
•
•
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @
ELECTRICAL LIFE: TP11, TP21 MODELS: 60,000 make-and-break
CONTACT RESISTANCE: Below 20 mΩ typ. initial @
INSULATION RESISTANCE: 10 9 Ω min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with Q, B, P, R or G contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-16 thru A-20. For additional options not shown in catalog, consult Customer Service Center. All
models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Models Available
Subminiature size—capable of
switching 1 AMP
Vertical & right angle terminations
PC & panel mount models
Snap-in front panel mounting available
Epoxy terminal seal-compatible with
bottom wash cleaning
RoHS compliant models available
20 V AC or DC max. Q contact material: 1 AMP @
120 V AC or 28 V DC. See page A-19 for additional ratings.
cycles at full load. TP12 MODELS: 30,000 cycles.
2-4 V DC, 100 mA, for both silver and gold plated contacts.
Switch Function
TP11
TP12
TP21
SPST Off-Mom.
SPDT On-Mom.
DPST Off-Mom.
Actuator or Bushing
SH
SH8
SH9
J81
LT
LT9
MS9
.155" high plunger, threaded,
.220" high bushing, flat
.155" high plunger, unthreaded,
.220" high bushing, round
.155" high plunger, unthreaded,
.220" high bushing, flat
Snap-in with frame
.215" high plunger, threaded,
.310" high bushing, flat
.215" high plunger, unthreaded,
.310" high bushing, flat
.130" high plunger,
.020" high bushing, round
Terminations
A
C
Z
AV
V3
W
Contact Material
B
P
Q
G
R
Typical Applications
•
•
•
Gold
Gold, matte-tin
Silver
Gold over silver
Gold over silver, matte-tin
Telecommunications and
networking equipment
Computers and peripherals
Instrumentation and controls
Right angle, PC thru-hole
PC Thru-hole
Solder lug
Vertical right angle, PC thru-hole
Vertical mount, v-bracket
Wire wrap
A-15
Materials
CASE: Glass filled nylon 4/6 or 6/6, flame retardant, heat stabilized
PLUNGER: Thermoplastic polyester (UL 94V-0).
CAP & FRAME: Nylon, black standard.
BUSHING: Brass, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass, matte-tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate
CENTER CONTACT & ALL TERMINALS: B contact material: Copper
TERMINAL SEAL: Epoxy. Refer to soldering and cleaning in
HARDWARE: Nut & Locking Ring: Brass nickel plated.
or diallyl phthalate (DAP), (UL 94V-0).
over nickel plate. Q contact material: Coin silver, silver plated.
See page A-19 for additional contact materials.
alloy, with gold plate over nickel plate. Q contact material:
Copper alloy, silver plated. See page A-19 for additional
contact materials.
Technical Data Chapter
Lockwasher: Steel, nickel plated.
Tiny Pushbutton Switches
Seal
E
Cap Color
2
NONE
1
Frame Color
2
NONE
Epoxy
Black
White
Black
Specifications and dimensions subject to change
Models with no cap
Models with no frame
www.ck-components.com
Dimensions are shown: Inches (mm)
TP Series
A