E225SD1CBE C&K Components, E225SD1CBE Datasheet - Page 45

• Manufacturer Part Number: E225SD1CBE
• Description: SWITCH PB DPDT .4VA SEAL PC THRU
• Manufacturer: C&K Components
• Series: E020r
• Type: Standardr

Specifications of E225SD1CBE

• Circuit: DPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 0.4VA @ 20VAC/DC
• Actuator Type: Plunger
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Contact Form: DPDT
• Contact Rating: 0.4 Volt-Amp
• Actuator: Plunger
• Supply Voltage: 20 Volts
• Mounting Style: Through Hole
• Terminal Seal: Epoxy
• Contact Plating: Gold
• Contact Material: Gold
• Illumination: Not Illuminated
• Mounting Angle: Vertical
• Voltage Rating Ac: 20 Volts
• Voltage Rating Dc: 20 Volts
• Power Capacity (va): 0.4 Volt-Amp
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: *E225SD1CBE; CKN9862

A
E010 Series
Sealed Momentary Pushbutton Switches
Specifications
CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or
ELECTRICAL LIFE: 40,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 20 mΩ typ. initial @
INSULATION RESISTANCE: 10 9 Ω min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: -30ºC to 75ºC.
CAP INSTALLATION FORCE: 10 lbs. max. permissible.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Any models supplied with P, Q, B or G contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-47 thru A-51. For additional options not shown in catalog, consult Customer Service Center.
All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
28 V DC. See page A-50 for additional ratings.
2–4 V DC, 100 mA, for both silver and gold plated contacts.
Plunger
S
L
M
Bushing
D1
Y
Switch Function
E112
.222" high
.338" high
.331" high, snap-fitting
Unthreaded
Threaded, keyway
SPDT On-Mom.
Terminations
A
AV2
C
A3
AV3
R2
V3
V4
V6
V8
V31
V81
V91
W
Z
Right angle, PC thru-hole
PC Thru-hole
Right angle, snap-in, PC thru-hole
Vertical right angle, snap-in, PC thru-hole
Right angle with PCB
.460" high, V-bracket
.630" high, V-bracket
.460" high, V-bracket
.953" high, V-bracket
.460" high, snap-in V-bracket
.953" high, snap-in V-bracket
1.150" high, snap-in V-bracket
.750" long, wire wrap
Solder lug
Vertical right angle, PC thru-hole
Features/Benefits
•
•
•
•
Process sealed, withstands
soldering and cleaning
Long life contact design
Snap-fitting plunger available,
accepts a variety of caps
RoHS compliant models available
A-46
Materials
CASE & BUSHING: Glass filled nylon 6/6, flame retardant
PLUNGER: Glass filled nylon or glass filled polyester (PBT)
SWITCH SUPPORT: Brass or steel, matte-tin plated.
SWITCH SUPPORT RETAINER: Stainless steel.
END CONTACTS: Q contact material: Coin silver, silver plated.
CENTER CONTACTS & ALL TERMINALS: Q contact material: Copper
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & locking ring-Brass, nickel plated.
(UL 94V-0).
(UL 94V-0), with internal o-ring seal standard.
See A-50 for additional ratings.
alloy, silver plated. See page A-50 for additional ratings.
Lockwasher-Steel, nickel plated.
Contact Material
B
P
Q
G
Seal
E
Gold
Gold, matte-tin
Silver
Gold over silver
Epoxy
Typical Applications
•
•
•
Specifications and dimensions subject to change
Instrumentation
Telecommunications and
networking equipment
Computers and peripherals
www.ck-components.com
Dimensions are shown: Inches (mm)
Models Available