GP1A73AXJ00F Sharp Microelectronics, GP1A73AXJ00F Datasheet - Page 4

• Manufacturer Part Number: GP1A73AXJ00F
• Description: PHOTOINTER OPIC W/DIFFERENT CONN
• Manufacturer: Sharp Microelectronics

Specifications of GP1A73AXJ00F

• Sensing Distance: 0.394" (10mm)
• Sensing Method: Transmissive
• Mounting Type: Snap-In
• Current - Supply: 16.5mA
• Voltage - Supply: 4.5 V ~ 5.5 V
• Response Time: 10µs, 10µs
• Package / Case: Slotted Module with Connector
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Configuration: -

(Precautions for Operation)
1) In this product, the PWB is fixed with a hook, and cleaning solvent may remain inside the case;
2) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent.
3) In order to stabilize power supply line, connect a by-pass capacitor of more than 0.01 F between V and GND
therefore, dip cleaning or ultrasonic cleaning are prohibited.
However, do not perform the above cleaning using a soft cloth with solvent in the marking portion.
In this case, use only the following type of cleaning solvent for wiping off;
When the cleaning solvents except for specified materials are used, please contact us.
near the device.
As for other general precautions, please refer to the chapter "Precautions for Use".
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol,
GP1A73A/GP1A73A1
CC