DC-WME-01T-JT Digi International, DC-WME-01T-JT Datasheet - Page 39

• Manufacturer Part Number: DC-WME-01T-JT
• Description: MODULE WI-ME CUSTOMIZABLE JTAG
• Manufacturer: Digi International
• Series: Digi Connect® Wi-MEr

Specifications of DC-WME-01T-JT

• Frequency: 2.4GHz
• Data Rate - Maximum: 11Mbps
• Modulation Or Protocol: 802.11 b
• Applications: General Purpose
• Power - Output: 16dBm
• Sensitivity: -82dBm
• Voltage - Supply: 3.14 V ~ 3.45 V
• Data Interface: PCB, Through Hole
• Memory Size: 4MB Flash, 8MB RAM
• Antenna Connector: RP-SMA
• Operating Temperature: -30°C ~ 75°C
• Package / Case: Module
• Wireless Frequency: 2.4 GHz
• Interface Type: SMA
• Modulation: CCK, DBPSK, DQPSK
• Security: 64/128 WEP, WPA, 802.11i, TKIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Transmitting: -
• Current - Receiving: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: NS7520
• Other names: 602-1002

Serial
transmit
DTR/GPIO5 PORTA6
RTS/GPIO4
NA
Serial
receive
DSR/GPIO3 PORTA2
CTS/GPIO2
DCD/
GPIO1
NA
Green LED
/INIT
NA
Name
PORTA7
PORTA5
PORTA4
PORTA3
PORTA1
PORTA0
PORTC7
PORTC6
PORTC5
PORTC4 -
PORTC0
Register
Bit
Allocated
Allocated
Allocated
Reserved
Allocated
Allocated
Allocated
Allocated
Reserved
Allocated
Available
Reserved
Category
Digi Connect ME GPIO pin use
Pin 8 on the 20 pin
header
Pin 10 on the 20 pin
header
Pin 9 on the 20 pin
header.
NA
Pin 7 on 20 pin
header,
Pin 12 on 20 pin
header
Pin 11 on 20 pin
header
Pin 13 on 20 pin
header.
NA
Connected to the
green LED
Pin 20 on 20 pin
header
NA
Interface
External
Used for serial transmit. It could be reassigned as
GPIO input or output and used for a general purposes.
Used for the serial DTR signal. It can be reassigned as
either GPIO input or output and used for a general
purpose. If used in conjunction with the development
board, this pin maps to GPIO5.
Used for the serial RTS signal. It could be reassigned
as either GPIO input or output and used for a general
purpose. If used in conjunction with the development
board, this pin maps to GPIO4.
NA
Used for serial receive. It could be reassigned as either
GPIO input or output and used for a general purpose.
Used for the serial DSR signal. It could be reassigned
as either GPIO input or output and used for a general
purpose. If used in conjunction with the development
board, this pin maps to GPIO3.
Used for the serial CTS signal, but could be
reassigned as either GPIO input or output and used for
a general purpose. If used in conjunction with the
development board, this pin maps to GPIO2.
Used for the serial DCD signal, but could be
reassigned as either GPIO input or output and used for
a general purpose. If used in conjunction with the
development board, this pin maps to GPIO1.
NA
Used as the Ethernet activity LED, but could be
reassigned as a general purpose LED. It must remain
a GPIO output for the LED to operate correctly. The
LED is lit when the signal is a logic low.
Can be configured for either GPIO input or GPIO
output
NA
P r o g r a m m i n g C o n s i d e r a t i o n s
Description
3 1