ETRX2 Telegesis Ltd, ETRX2 Datasheet - Page 15

• Manufacturer Part Number: ETRX2
• Description: MODULE ZIGBEE EM250 CHIP ANT
• Manufacturer: Telegesis Ltd

Specifications of ETRX2

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: ISM
• Power - Output: 3dBm
• Sensitivity: -98dBm
• Voltage - Supply: 2.1 V ~ 3.6 V
• Current - Receiving: 35.5mA
• Current - Transmitting: 35.5mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 5kB SRAM
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Module Applications: AMR, Building Automation, Wireless Sensor Network, M2M Industrial Controls
• Mcu Supported Families: EM250
• Processor Type: EM250
• Wireless Protocol: IEEE 802.15.4
• Data Rate: 250Kbps
• Module Interface: I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 920-1000-2

7
Ordering/Product Code
EAP-E
EAP-E-PA
ETRX2DVKA
ETRX2DVKA-Plus
ETRX2
Notes:
©2009 Telegesis (UK) Ltd
•
•
•
Ordering Information
Customers’ PO’s must state the Ordering/Product Code.
There is no “blank” version of the ETRX2 Module available. All Modules carry both the
EmberNet Stack and the Telegesis AT style Command Layer.
program custom firmware they can simply overwrite the existing firmware
Please contact Telegesis if you require additional AT style commands or specific integration
assistance.
Table 3. Ordering Information
Description
Access Point based on standard ETRX2
Access Point based on ETRX2-PA
Development Kit with:
Telegesis Development Kit with:
•
•
•
•
•
•
•
•
•
•
Telegesis Wireless Mesh Networking Module with Ember
ZigBee® Technology:
•
•
•
•
•
•
•
•
1 x ETRX2DV Development Board
1 x ETRX2HW Module with a fitted Harwin
1 x ETRX2MCB Carrier Boards fitted with ETRX2 modules
1 x ETRX2-PA MCB with ETRX2-PA Module
1 x AA Battery Holders with leads
1 x USB cable
1 x ETRX2USB USB stick
1 x ETRX2HRHW-PA Module with Hirose connector for
external antenna and Harwin
1 x ½ Wave antenna
1 x 100mm cable to connect module to antenna
•
•
•
•
•
AT Style Command Interpreter
Integrated 2.4GHz Antenna
1 x ETRX2HW Module with Board to Board Connector
1 x ETRX2DV Development Board
2 x ETRX2 Modules soldered to
2 x ETRX2MCB Module Carrier Boards
2 x AA Battery Holders with Leads & Connector Plugs
1 x USB Cable
AT Style Command Interpreter
Integrated 2.4GHz Antenna
Telegesis AT Style Command Interpreter and
Ember’s EmberZNet2.x stack
Integrated 2.4GHz Antenna
- 15 -
EAP-E Product Manual (Rev 1.04)
Where customers wish to
EAP-E