MTCMR-G-F4 Multi-Tech Systems, MTCMR-G-F4 Datasheet - Page 146

• Manufacturer Part Number: MTCMR-G-F4
• Description: MODEM GPRS QUAD BAND GSM GLOBAL
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-G-F4

• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Function: Transceiver, Modem
• Data Rate - Maximum: 115.2kbps
• Modulation Or Protocol: GSM, GPRS
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module with Case
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Power - Output: -
• Sensitivity: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 881-1151; MTCMR-G-F4

Unsolicited Result: SIM Toolkit Control Response
+STCR
SIM Toolkit Give Response +STGR
Multi-Tech Systems, Inc. GPRS AT Commands Reference Guide (Document Number S000293J)
Description:
Values:
Syntax:
Description:
Values:
Syntax:
Values:
When the customer application makes an outgoing call or an outgoing SMS and if the call control facility
is activated, CALL CONTROL and SMS CONTROL responses can be identified. This is also applicable
to SS calls.
<Result>
<Number>
<MODestAddr>
<TextInfo>
Command Syntax:
This command allows the application/user to select an item in the main menu or to answer the following
proactive commands:
•
•
•
•
•
•
It is also possible to terminate the current proactive command session by sending a Terminal Response
to the SIM, with the following parameters:
•
•
•
•
•
The values are listed after the Command Syntax Table.
Command syntax: +STGR=<CmdType>[,<Result>,<Data>]
<CmdType>
Command
AT+STGR=<CmdType>[,<Result>,<Data
For GetInput with <Result>=1:
AT+STGR=3,1<CR>
<Data><Ctrl Z>
For GetInkey with <Result>=1
AT+STGR=2,1,”<Data>”
AT+STGR=?
0
1
GET INKEY
GET INPUT
SELECT ITEM
SETUP CALL
DISPLAY TEXT
SETUP EVENT LIST
BACKWARD MOVE
BEYOND CAPABILITIES
UNABLE TO PROCESS
NO RESPONSE
END SESSION
0
1
2
3
4
6
11
95
96
97
98
99
Control response not allowed.
Control response with modification.
Item selection in the main menu.
User confirmation to clear a ‘Disp Text’.
Response for a ‘Get Inkey’.
Response for a ‘Get Input’.
Response for a ‘Setup call’.
Response for a ‘Sel Item’.
Reponse for a ‘Setup event list’.
Backward move
Command beyond ME capabilities
ME currently unable to process command
No response from the user.
User abort.
Called number, Service Center Address or SS String in ASCII format.
MO destination address in ASCII format.
Text information in ASCII format.
+STCR: <Result>[,<Number>,<MODestAddr>,<TextInfo>]
Key Pressed By The User.
Message Entered By The User.
Selected Item.
User Confirmation.
User Confirmation To Clear The Message.
Reporting events.
Process a backward move
Command beyond ME capabilities
ME is currently unable to process command
No response from the user
User abort.
Possible responses
OK
+CME ERROR: <err>
OK
+CME ERROR: <err>
OK
+CME ERROR: <err>
OK
Chapter 14 – SIM Toolkit
146