MTCMR-G-F4 Multi-Tech Systems, MTCMR-G-F4 Datasheet - Page 135

• Manufacturer Part Number: MTCMR-G-F4
• Description: MODEM GPRS QUAD BAND GSM GLOBAL
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-G-F4

• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: General Purpose
• Interface: RS-232, USB
• Function: Transceiver, Modem
• Data Rate - Maximum: 115.2kbps
• Modulation Or Protocol: GSM, GPRS
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module with Case
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Power - Output: -
• Sensitivity: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 881-1151; MTCMR-G-F4

Reset +WRST
Set Standard Tone +WSST
Multi-Tech Systems, Inc. GPRS AT Commands Reference Guide (Document Number S000293J)
Description:
Values:
Syntax:
Description:
Values:
Syntax:
This command resets the modem after the time specified by the <delay> parameter.
<val1>
<Delay> specify the time for reset
<RemainTime> time before next reset
Command syntax: AT+WRST =<Mode>,<Delay>
Response syntax: +WRST: <Mode>,<Delay>,<RemainTime>
This command sets and gets the sound level of the Standard Tones.
<sound level> Range [0; 15]
<ring tone level> Range [0; 15]
Command syntax:
Command
AT+WSST=0
Note: Set volume to Maximum
AT+WSST=15
Note: Set volume to Minimum
AT+WSST=,5
Note: Set ring tone level to 5
AT+WSST?
Note: get current standard tones
sound level
AT+WSST=?
Note: supported parameters
Command
AT+WRST=?
AT+WRST=0
Note: Disable timer
AT+WRST=1,”001:03”
Note: Enable timer and put delay at 1 hour 3
minutes
AT+WRST?
0
1
Range “000:00”- “168:59” (format hhh:mm)
Range “000:01”- “168:59” (format hhh:mm)
0
15 Minimum volume
0
15 Minimum volume
timer reset is disabled
timer reset is enabled
Maximum volume (default)
Maximum volume (default)
AT+WSST=[<sound level>][,<ring tone level>]
Possible responses
OK
OK
OK
+WSST: 15,5
OK
Note: current standard tones level is 15
(minimum), and ring tone level is 5.
+WSST: (0-15),(0-15)
OK
Possible responses
OK
OK
OK
+WRST: 1,”001:03”,”001:01”
OK
Note: Timer activated to reset after 1 hour and 3
minutes. At this point, 1 hour and 1 minute remain
before next reset.
Chapter 13 – Specific AT Commands
135