EVAL_PAN1315 Panasonic - ECG, EVAL_PAN1315 Datasheet - Page 25

• Manufacturer Part Number: EVAL_PAN1315
• Description: EVAL KIT FOR PAN1315 W/TI MSP430
• Manufacturer: Panasonic - ECG
• Type: Transceiver, Bluetooth 2.1+EDRr

Specifications of EVAL_PAN1315

• Featured Product: PAN1315 Bluetooth® HCI Module
• Frequency: 2.4GHz
• For Use With/related Products: PAN1315, MSP430
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: EVAL-PAN1315; P14265

CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN1315
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
19.3. USAGE CONDITIONS NOTES
19.4. STORAGE NOTES
(4)
(5)
(6)
(7)
(8)
(9)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1)
(2)
(3)
(4)
(5)
due to the effects of heat generated by neighboring components.
If a vinyl-covered wire comes into contact with the products, then the cover
will melt and generate toxic gas, damaging the insulation. Never allow contact
between the cover and these products to occur.
This product should not be mechanically stressed or vibrated when reflowed.
If you want to repair your board by hand soldering, please keep the
conditions of this chapter.
Do not wash this product.
Refer to the recommended pattern when designing a board.
Pressing on parts of the metal cover or fastening objects to the metal will
cause damage to the unit.
Take measures to protect the unit against static electricity.
If pulses or other transient loads (a large load applied in a short time) are
applied to the products, check and evaluate their operation befor assembly
on the final products.
Do not use dropped products.
Do not touch, damage or soil the pins.
Follow the recommended condition ratings about the power supply applied to
this product.
Electrode peeling strength: Do not add pressure of more than 4.9N when
soldered on PCB.
Pressing on parts of the metal cover or fastening objects to the metal cover
will cause damage.
These products are intended for general purpose and standard use in general
electronic equipment, such as home appliances, office equipment,
information and communication equipment.
The module should not be stressed mechanically during storage.
Do not store these products in the following conditions or the performance
characteristics of the product, such as RF performance will be adversely
affected:
Keep this product away from water, poisonous gas and corrosive gas.
This product should not be stressed or shocked when transported.
Follow the specification when stacking packed crates (max. 10).
• Storage in salty air or in an environment with a high concentration of
• Storage in direct sunlight
• Storage in an environment where the temperature may be outside the range
• Storage of the products for more than one year after the date of delivery
corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX
of 5°C to 35°C range, or where the humidity may be outside the 45 to 85%
range.
Storage period: Please check the adhesive strength of the embossed tape
and soldering after 6 months of storage.
CLASS 2 BLUETOOTH MODULE
Bluetooth Modul der Klasse 2
PRODUCT SPECIFICATION
PANASONIC’S CODE
ENW89818C2JF
Produktspezifikation
No.
DS-1315-2400-102
PAGE
Seite
DATE
Datum
www.pedeu.pansonic.de
21.04.2009
25 of 32
REV.
0.98