EVAL_PAN1315 Panasonic - ECG, EVAL_PAN1315 Datasheet - Page 22

• Manufacturer Part Number: EVAL_PAN1315
• Description: EVAL KIT FOR PAN1315 W/TI MSP430
• Manufacturer: Panasonic - ECG
• Type: Transceiver, Bluetooth 2.1+EDRr

Specifications of EVAL_PAN1315

• Featured Product: PAN1315 Bluetooth® HCI Module
• Frequency: 2.4GHz
• For Use With/related Products: PAN1315, MSP430
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: EVAL-PAN1315; P14265

CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN1315
16. RECOMMENDED FOOT PATTERN
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
Dimensions in mm.
The land pattern dimensions above are meant to serve only as a guide. This information is
provided without any legal liability.
For the footprint, it is recommended to incorporate a 50µm bigger size for the pads in each
direction compared to the module footprint. Please refer to chapter 17, Foot Print of the
Module.
For the solder paste screen, use the same screen for the module. Solder paste screen
cutouts (with slightly different dimensions) might be optimum depending on your soldering
process. For example, the solder paste screen thickness chosen might have an effect. The
solder screen thickness depends on your production standard -- 120µm to 150µm is
recommended.
IMPORTANT:
Although the bottom side of PAN1315 is fully coated, no copper such as through hole vias,
planes or tracks on the board component layer should be located below the PAN1315 to
avoid creating a short. In cases where a track or through hole via has to be located under the
module, please make a note that it has to be kept away from PAN1315 bottom pads. The
PAN1315 multilayer pcb contains an inner RF shielding plane, therefore no pcb shielding
plane below the module is needed.
When using an onboard ceramic antenna, please place the antenna on the edge of your
carrier board (if allowable).
If you have any questions on these points, please contact your local Panasonic
representative.
Before releasing the layout, we recommend to sent the schematic and layout for final check
to [e-mail].
CLASS 2 BLUETOOTH MODULE
Bluetooth Modul der Klasse 2
PRODUCT SPECIFICATION
PANASONIC’S CODE
ENW89818C2JF
Produktspezifikation
No.
DS-1315-2400-102
PAGE
Seite
DATE
Datum
www.pedeu.pansonic.de
21.04.2009
22 of 32
REV.
0.98