EVAL_PAN1315 Panasonic - ECG, EVAL_PAN1315 Datasheet - Page 24

• Manufacturer Part Number: EVAL_PAN1315
• Description: EVAL KIT FOR PAN1315 W/TI MSP430
• Manufacturer: Panasonic - ECG
• Type: Transceiver, Bluetooth 2.1+EDRr

Specifications of EVAL_PAN1315

• Featured Product: PAN1315 Bluetooth® HCI Module
• Frequency: 2.4GHz
• For Use With/related Products: PAN1315, MSP430
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: EVAL-PAN1315; P14265

CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN1315
18. RELIABILITY TESTS
19. CAUTIONS
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
The measurement should be done after being exposed to room temperature and humidity for
1 hour.
Failure to follow the guidelines set forth in this document may result in degrading of the
product’s functions and damage to the product.
19.1. DESIGN NOTES
19.2. INSTALLATION NOTES
No.
1
2
3
4
5
6
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1)
(2)
(3)
Item
Vibration test
Shock test
Heat cycle test
Moisture test
Low temp. test
High temp. test
Please follow the conditions written in this specification, especially the control
signals of this module.
The supply voltage has to be free of AC ripple voltage (for example from a
battery or a low noise regulator output). For noisy supply voltages, provide a
decoupling circuit (for example a ferrite in series connection and a bypass
capacitor to ground of at least 47uF directly at the module).
This product should not be mechanically stressed when installed.
Keep this product away from heat. Heat is the major cause of decreasing the
life of these products.
Avoid assembly and use of the target equipment in conditions where the
products' temperature may exceed the maximum tolerance.
The supply voltage should not be exceedingly high or reversed. It should not
carry noise and/or spikes.
Keep this product away from other high frequency circuits.
Reflow soldering is possible twice based on the conditions in chapter 15.
Set up the temperature at the soldering portion of this product according to
this reflow profile.
Carefully position the products so that their heat will not burn into printed
circuit boards or affect the other components that are susceptible to heat.
Carefully locate these products so that their temperatures will not increase
CLASS 2 BLUETOOTH MODULE
Bluetooth Modul der Klasse 2
PRODUCT SPECIFICATION
Limit
Electrical parameter should be in
specification
the same as above
the same as above
the same as above
the same as above
the same as above
PANASONIC’S CODE
ENW89818C2JF
Produktspezifikation
Condition
a) Freq.:10~50Hz,Amplitude:1.5mm
a) 20min. / cycle,1hrs. each of XYZ axis
b) Freq.:30~100Hz, 6G
b) 20min. / cycle,1hrs. each of XYZ axis
Dropped onto hard wood from height of 50cm for 3 times
-40°C for 30min. and +85°C for 30min.;
each temperature 300 cycles
+60°C, 90% RH, 300h
-40°C, 300h
+85°C, 300h
No.
DS-1315-2400-102
PAGE
Seite
DATE
Datum
www.pedeu.pansonic.de
21.04.2009
24 of 32
REV.
0.98