1320X-QE-DSK-BDM Freescale Semiconductor, 1320X-QE-DSK-BDM Datasheet - Page 24

• Manufacturer Part Number: 1320X-QE-DSK-BDM
• Description: KIT EVAL FOR MC1320X BDM CABLE
• Manufacturer: Freescale Semiconductor
• Type: Transceiver, 802.15.4/ZigBeer

Specifications of 1320X-QE-DSK-BDM

• Frequency: 2.4GHz
• Interface Type: USB
• For Use With/related Products: MC1320x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Interface Locations and Pinouts
4.7
The 1321x-QE128EVB contains four red LEDs and one green LED
There is a slide switch and 4 pushbuttons.
4.8
The 1320x-QE128EVB supports connection to a subset of the defined BDM connector. The BDM
interface is a standard 2.54mm/0.1inch spacing, 6-pin debug interface (J9). The 6-pin connector is clearly
separated from the GPIO pin headers (J3, J4) and located at the upper right corner of top side of the
module. The 6-pin connector has Pin 1 marking for correct plug-in of the development cable.
Table 4-3
4-4
•
•
•
•
The four red LEDs (LED1 through LED4) are intended to be application-based indicators and are
driven by the MCU and controlled by the software application.
As already stated, the green LED is directly connected to the on-board main supply and acts as the
“Power On” indication.
SW1 is an on/off slide switch that connects the power supplies.
Four additional pushbuttons (SW2 through SW5) are connected to the MCU GPIO and are
intended as application input devices. All four buttons have interrupt generation capability.
LEDs and Switches
Debug/Development Connector (BDM
shows the BDM header pinout.
PWR LED (green)
LED1 (red)
LED2 (red)
LED3 (red)
LED4 (red)
SW2 (pushbutton)
SW3 (pushbutton)
SW4(pushbutton)
SW5 (pushbutton)
SW1 (ON/OFF)
Item
BKGD
Name
Table 4-3. BDM 6-Pin Connector Assignments (J9)
NC
NC
1
1320x-QE128EVB Reference Manual, Rev. 1.0
Table 4-2. Switch and LED Summary
VCC
PTE3
PTE4
PTE5
PTE6
PTD0
PTD1
PTD2
PTD3
ON/OFF
GPIO Connection
Pin #
1
3
5
‘Power On’ indication
Application specific
Application specific
Application specific
Application specific
Interrupt functionality.
Interrupt functionality.
Interrupt functionality.
Interrupt functionality.
HW ON/OFF
Pin #
2
4
6
Interface)
Feature
(RESET)
Pullup
Name
V_BB
GND
2
Freescale Semiconductor