XBIB-R Digi International/Maxstream, XBIB-R Datasheet - Page 63

• Manufacturer Part Number: XBIB-R
• Description: BOARD RS232 ZIGBEE MOD PRO
• Manufacturer: Digi International/Maxstream

Specifications of XBIB-R

• Design Resources: XBIB-R Schematic
• Accessory Type: Interface Board
• For Use With/related Products: XBee and XBee Pro Radios
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

XBee/XBee‐PRO™ OEM RF Modules ‐ 802.15.4 ‐ v1.xAx [2007.05.031]
Canada (IC)
Japan
Approved Antennas
Labeling Requirements
Labeling Requirements
XBee OEM RF Module
XBee-PRO OEM RF Module (@ 10 dBm Transmit Power, PL parameter value must equal 0)
When integrating high-gain antennas, European regulations stipulate EIRP power maximums. Use
the following guidelines to determine which antennas to design into an application.
The following antenna types have been tested and approved for use with the XBee Module:
Antenna Type: Yagi
RF module was tested and approved with 15 dBi antenna gain with 1 dB cable-loss (EIRP Maxi-
mum of 14 dBm). Any Yagi type antenna with 14 dBi gain or less can be used with no cable-loss.
Antenna Type: Omni-directional
RF module was tested and approved with 15 dBi antenna gain with 1 dB cable-loss (EIRP Maxi-
mum of 14 dBm). Any Omni-directional type antenna with 14 dBi gain or less can be used with no
cable-loss.
Antenna Type: Flat Panel
RF module was tested and approved with 19 dBi antenna gain with 4.8 dB cable-loss (EIRP Maxi-
mum of 14.2 dBm). Any Flat Panel type antenna with 14.2 dBi gain or less can be used with no
cable-loss.
The following antennas have been tested and approved for use with the embedded XBee-PRO RF
Module:
The RF modem encasement was designed to accommodate the RPSMA antenna option.
Labeling requirements for Industry Canada are similar to those of the FCC. A clearly visible label
on the outside of the final product enclosure must display the following text:
The integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Sub. B -
Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry Canada accepts
FCC test report or CISPR 22 test report for compliance with ICES-003.
In order to gain approval for use in Japan, the XBee-PRO RF Module must contain firmware that
limits its transmit power output to 10 dBm.
For a list of module part numbers approved for use in Japan, contact MaxStream [call 1-801-765-
9885 or send e-mail to [e-mail]].
A clearly visible label on the outside of the final product enclosure must display the following text:
© 2007 MaxStream, Inc.
• Dipole (2.1 dBi, Omni-directional, Articulated RPSMA, MaxStream part number A24-HABSM)
• Chip Antenna (-1.5 dBi)
• Attached Monopole Whip (1.5 dBi)
Contains Model XBee Radio, IC: 4214A-XBEE
Contains Model XBee-PRO Radio, IC: 4214A-XBEEPRO
ID: 005NYCA0378
Appendix A: Agency Certifications
63