XBIB-R Digi International/Maxstream, XBIB-R Datasheet - Page 57

• Manufacturer Part Number: XBIB-R
• Description: BOARD RS232 ZIGBEE MOD PRO
• Manufacturer: Digi International/Maxstream

Specifications of XBIB-R

• Design Resources: XBIB-R Schematic
• Accessory Type: Interface Board
• For Use With/related Products: XBee and XBee Pro Radios
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

XBee/XBee‐PRO™ OEM RF Modules ‐ 802.15.4 ‐ v1.xAx [2007.05.031]
Identifies the UART data frame for the host to
correlate with a subsequent ACK (acknowledgement).
Setting Frame ID to ‘0' will disable response frame.
Identifies the UART data frame for the host to
correlate with a subsequent ACK (acknowledgement).
Setting Frame ID to ‘0' will disable response frame.
Frame ID (Byte 5)
Frame ID (Byte 5)
Identifies the UART data frame being reported.
Note: If Frame ID = 0 in AT Command Mode,
no AT Command Response will be given.
Start Delimiter
Start Delimiter
AT Command Response
TX (Transmit) Request: 64-bit address
TX (Transmit) Request: 16-bit address
0x7E
0x7E
API Identifier Value: 0x88
Response to previous command.
In response to an AT Command message, the module will send an AT Command Response mes-
sage. Some commands will send back multiple frames (for example, the ND (Node Discover) and
AS (Active Scan) commands). These commands will end by sending a frame with a status of
ATCMD_OK and no cmdData.
Figure 3‐09. AT Command Response Frames.
API Identifier Value: 0x00
A TX Request message will cause the module to send RF Data as an RF Packet.
Figure 3‐10. TX Packet (64‐bit address) Frames
API Identifier Value: 0x01
A TX Request message will cause the module to send RF Data as an RF Packet.
Figure 3‐11. TX Packet (16‐bit address) Frames
© 2007 MaxStream, Inc.
Start Delimiter
0x7E
Frame ID (Byte 5 )
MSB
MSB
Length
Length
LSB
LSB
Destination Address (Bytes 6-13)
Destination Address (Bytes 6-7)
API Identifier
API Identifier
MSB
MSB first, LSB last.
Broadcast = 0xFFFF
MSB first, LSB last.
Broadcast =
0x000000000000FFFF
0x01
0x00
Length
API-specific Structure
API-specific Structure
LSB
API Identifier
Frame Data
Frame Data
0x88
Identifier-specific Data
Identifier-specific Data
API-specific Structure
cmdData
cmdData
Command Name - Two
ASCII characters that
identify the AT Command.
Frame Data
AT Command (Bytes 6-7)
Identifier-specific Data
0x01 = Disable ACK
0x04 = Send packet with Broadcast Pan ID
All other bits must be set to 0.
0x01 = Disable ACK
0x04 = Send packet with Broadcast Pan ID
All other bits must be set to 0.
Checksum
Checksum
1 Byte
1 Byte
cmdData
Options (Byte 14)
Options (Byte 8)
Checksum
1 Byte
0 = OK
1 = ERROR
Status (Byte 8)
Chapter 3 ‐ RF Module Configuration
The HEX (non-ASCII) value
of the requested register
Value (Byte(s) 9-n)
Up to 100 Bytes per packet
Up to 100 Bytes per packet
RF Data (Byte(s) 15-n)
RF Data (Byte(s) 9-n)
57