TWR-MCF51MM Freescale Semiconductor, TWR-MCF51MM Datasheet - Page 5

• Manufacturer Part Number: TWR-MCF51MM
• Description: TOWER SYSTEM BOARD MCF51MM
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®, Flexis™r
• Type: MCUr

Specifications of TWR-MCF51MM

• Contents: Board, 3 Modules, MED-EKG Kit, Cables, Documentation, DVD
• Product: Microcontroller Modules
• Data Bus Width: 32 bit
• Core Processor: MCF51MM
• Clock Speed: 32 KHz
• Interface Type: RS232, RS485, CAN , USB
• Flash: 256 KB
• Operating Supply Voltage: 3.3 V
• Silicon Manufacturer: Freescale
• Core Architecture: Coldfire
• Core Sub-architecture: Coldfire V1
• Silicon Core Number: MCF51
• Silicon Family Name: Flexis - MCF51MM
• Rohs Compliant: Yes
• For Use With/related Products: Freescale Tower System, MCF51MM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Figure 2: Tower System Assembled
NOTE: Figure 2 is a Tower System without the optional
MED-EKG assembly. For details on how to assemble the
MED-EKG, please refer to Lab 1 on the DVD.
Primary edge of TWR-MCF51MM and
TWR-SER must connect to this Primary
elevator, which has components on the
bottom of the board, including the mini-
USB connector.
Quick Start Guide for TWR-MCF51MM
OSBDM interface to program and debug
the MCF51MM256. It does not connect
This mini-USB port is only used for
connecting pins 3 and 4 as shown.
to the MCF51MM256 USB ports.
to this is not needed in this kit.
This configures the module for
required by the labs in this kit.
This is the TWR-SER module.
Set Jumper J16 on TWR-SER
This is the mini-USB from the
Primary elevator. Connection
MCF51MM256 USB module.
TWR-SER powers the whole
USB device mode, which is
module to middle position
This mini-USB port on the
the Secondary elevator..
MCF51MM256 USB via
Make sure this side is
Tower System setup.
It interfaces with the
TOWER SYSTEM
this mini-USB port.
Users can test the