TWR-MCF51MM Freescale Semiconductor, TWR-MCF51MM Datasheet - Page 10

• Manufacturer Part Number: TWR-MCF51MM
• Description: TOWER SYSTEM BOARD MCF51MM
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®, Flexis™r
• Type: MCUr

Specifications of TWR-MCF51MM

• Contents: Board, 3 Modules, MED-EKG Kit, Cables, Documentation, DVD
• Product: Microcontroller Modules
• Data Bus Width: 32 bit
• Core Processor: MCF51MM
• Clock Speed: 32 KHz
• Interface Type: RS232, RS485, CAN , USB
• Flash: 256 KB
• Operating Supply Voltage: 3.3 V
• Silicon Manufacturer: Freescale
• Core Architecture: Coldfire
• Core Sub-architecture: Coldfire V1
• Silicon Core Number: MCF51
• Silicon Family Name: Flexis - MCF51MM
• Rohs Compliant: Yes
• For Use With/related Products: Freescale Tower System, MCF51MM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1. Look for the “MCF51MM POT ADC”
2. Start CodeWarrior by selecting it
3. From the CodeWarrior main menu,
4. In CodeWarrior, click Debug.
TOWER SYSTEM
STEP
4
application in the DVD under the
“Software” tab, “Labs” section. Copy
the file to your working directory and
unzip it.
from the Windows Start menu. Make
sure you open Version 6.3 if you have
multiple versions installed.
choose File > Open and open the
following file: d:\work\POT_ADC\
MCF51MM_POT_ADC\POT_ADC.
mcp.
This is the project you just created
in number 1 above.
This will activate the hiwave
debugger which also displays the
following message. Click OK and
CodeWarrior will use the on-board
OSBDM circuit to erase and program
the MCF51MM256 internal flash.
(continued from previous page)
5. In the True-Time Simulator and
6. In the same debugger window,
7. These buttons
Real-Time Debugger window
click (start and continue) to
run the application. Rotate the
potentiometer back and forth from the
TWR-MCF51MM module. You will see
that LED 1 to LED 4 will turn off and
on sequentially depending upon the
rotation of the potentiometer.
you can click on this button
to halt the application. The
source window will stop at the line of
code where you halt the application.
allow you to do
Single Step, Step Over, Step Out
and Assembly Step in your project.