E3X-NH11 Omron, E3X-NH11 Datasheet - Page 6

• Manufacturer Part Number: E3X-NH11
• Description: SENSOR PHOTO AMP FIBEROPTIC NPN
• Manufacturer: Omron
• Type: High Precision Fiber Optic Amplifierr
• Series: E3X-NHr

Specifications of E3X-NH11

• Output Type: NPN
• Amplifier Type: General Purpose
• Voltage - Supply: 12 V ~ 24 V
• Current - Supply: 75mA
• Mounting Type: DIN Rail
• Features: Three mode for optimal sensing
• Light Source: Red LED
• Connection: Pre-leaded
• Output Configuration: NPN
• Sensor Output: NPN
• Switch Terminals: Cable
• Supply Voltage Min: 12V
• Peak Reflow Compatible (260 C): No
• Sensor Input: Fiber Optic
• Supply Voltage Max: 24V
• Leaded Process Compatible: No
• Rohs Compliant: No
• Fiber Optic Sensor Type: General Purpose
• Lead Free Status / RoHS Status: Contains lead / RoHS compliant by exemption
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Contains lead / RoHS compliant by exemption
• Other names: E3XNH11; Z1110

3. Set the mode selector to RUN. Be sure that the middle
E3X-NH
Through-beam Model
Diffuse Model
If teaching is not stable:
The threshold indicator (red) will flash. The built-in buzzer will
beep 3 times.
Change the position of the object and the sensing distance
that has been set and repeat the process.
threshold indicator is lit. The threshold will be set to a 50%
value.
Light is received.
Diffuse Model
Base
Hold set button down
for 0.5 to 2.5 s
Mark
One-point Teach Mode
1. Set the mode selector to TEACH.
2. Set the mode selector to RUN. The threshold is set automati-
3. The Sensor will automatically compensate for environmental
Press the SET button once without a target object in the
sensing area. Be sure that all the threshold indicators (red)
are lit. The built-in buzzer will beep once when the threshold
indicators are lit.
cally.
changes.
Press once for 0.5 to 2.5 s
E3X-NH
7