SAK-XC164CM-8F40F AA Infineon Technologies, SAK-XC164CM-8F40F AA Datasheet - Page 45

• Manufacturer Part Number: SAK-XC164CM-8F40F AA
• Description: IC MCU 16BIT 64KB FLSH TQFP-64-8
• Manufacturer: Infineon Technologies
• Series: XC16xr

Specifications of SAK-XC164CM-8F40F AA

• Core Processor: C166SV2
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: CAN, SPI, UART/USART
• Peripherals: PWM, WDT
• Number Of I /o: 47
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 2.7 V
• Data Converters: A/D 14x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-LFQFP
• Data Bus Width: 16 bit
• Data Ram Size: 6 KB
• Interface Type: 2xASC, 2xSSC
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 47
• Number Of Timers: 9
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 14 Channel
• Packages: PG-LQFP-64
• Max Clock Frequency: 40.0 MHz
• Sram (incl. Cache): 6.0 KByte
• Can Nodes: 2
• A / D Input Lines (incl. Fadc): 14
• Program Memory: 64.0 KByte
• For Use With: B158-H8961-X-X-7600IN - KIT EASY XC164CMXC164CMUCANIN - KIT U-CAN STARTER XC164CMMCBX167-NET - BOARD EVAL INFINEON CAN/ETHRNTMCBXC167-BASIC - BOARD EVAL BASIC INFINEON XC16X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: SAK-XC164CM-8F40FAACT; SAK-XC164CM-8F40FAACT; SAK-XC164CM-8F40FAAINCT

3.16
The XC164CM provides up to 47 I/O lines which are organized into three input/output
ports and one input port. All port lines are bit-addressable, and all input/output lines are
individually (bit-wise) programmable as inputs or outputs via direction registers. The I/O
ports are true bidirectional ports which are switched to high impedance state when
configured as inputs. The output drivers of some I/O ports can be configured (pin by pin)
for push/pull operation or open-drain operation via control registers. During the internal
reset, all port pins are configured as inputs.
The edge characteristics (shape) and driver characteristics (output current) of the port
drivers can be selected via registers POCONx.
The input threshold of some ports is selectable (TTL or CMOS like), where the special
CMOS like input threshold reduces noise sensitivity due to the input hysteresis. The
input threshold may be selected individually for each byte of the respective ports.
All port lines have programmable alternate input or output functions associated with
them. All port lines that are not used for these alternate functions may be used as general
purpose IO lines.
Table 7
Port
PORT1
Port 3
Port 5
Port 9
1) Can be assigned by software.
Data Sheet
Parallel Ports
Control
Pad drivers
Pad drivers,
Open drain,
Input threshold
–
Pad drivers,
Open drain,
Input threshold
Summary of the XC164CM’s Parallel Ports
Alternate Functions
Capture inputs or compare outputs,
Serial interface lines
Timer control signals, serial interface lines,
System clock output CLKOUT (or FOUT)
Analog input channels to the A/D converter,
Timer control signals
Capture inputs or compare outputs
CAN interface lines
43
1)
Functional Description
Derivatives
V1.4, 2007-03
XC164CM