DSPIC30F5016-20I/PT Microchip Technology, DSPIC30F5016-20I/PT Datasheet - Page 13

• Manufacturer Part Number: DSPIC30F5016-20I/PT
• Description: IC DSPIC MCU/DSP 66K 80TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F5016-20I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 66KB (22K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• For Use With: AC164320 - MODULE SKT MPLAB PM3 80TQFPAC30F007 - MODULE SKT FOR DSPIC30F 80TQFP
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Other names: DSPIC30F501620IPT

21. Page 7-7, Register 7-1 OSCCON
Register 7-1:
 2004 Microchip Technology Inc.
Upper Byte:
bit 15
bit 15-14
bit 11-10
R/W-0
TUN3
On page 7-7, Register 7-1: OSCCON, the register
description should be modified as follows to
include the TUN<3:0> bits for the on-chip Fast RC
oscillator. All other bit definitions do not change
and hence are not described.
Legend:
R = Readable bit
-n = Value at POR
y = Value set from configuration bits on POR or BOR
TUN<3:2>: Upper 2 bits of the TUN bit-field. Refer to the description of TUN<1:0> (OSCCON<11:10>)
TUN<1:0>: Lower 2 bits of the TUN bit-field.
Note:
R/W-0
TUN2
Note:
Lower Byte:
bit 7
OSCCON: Oscillator Control Register
bits for details.
The four bit field specified by TUN<3:0> allows the user to tune the internal fast RC oscillator which
has a nominal frequency of 8 MHz. The user may be able to tune the frequency of the FRC oscillator
within a range of +/- 12% (or 960 kHz) in steps of 1.5% around the factory-calibrated frequency
setting, as follows:
TUN<3:0> = 0111 provides the highest frequency
......
TUN<3:0> = 0000 provides the factory-calibrated frequency
......
TUN<3:0> = 1000 provides the lowest frequency
R/W-0
POST<1:0>
The OSCCON register description and functionality may vary depending on the clock sources
available on the selected device. Please refer to the specific device data sheet for additional
details on this register..
Refer to the device-specific data sheet for the tuning range and tuning step size for the FRC
ocillator on your device.
R-y
COSC<1:0>
R/W-0
dsPIC30F Family Reference Manual
R-y
W = Writable bit
‘1’ = Bit is set
LOCK
R-0
TUN1
U-0
U-0
—
TUN0
U-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
CF
R/W-y
NOSC<1:0>
U-0
—
R/W-y
x = Bit is unknown
LPOSCEN
bit 8
R/W-0
DS80169E-page 13
OSWEN
R/W-0
bit 0