ST7FLITE29F2M6TR STMicroelectronics, ST7FLITE29F2M6TR Datasheet - Page 45

• Manufacturer Part Number: ST7FLITE29F2M6TR
• Description: IC MCU 8BIT 8K FLASH 20-SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE29F2M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLIT2-COS/COM, ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel / 13 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Table 20. SCIx_GetBuffer
Note: This function is only for Polling mode
Caution: The application can lose control if the SCI is disabled while using this function in poll-
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Output Parameters
Required Preconditions
Functions called
See also
ing mode.
SCIx_GetBuffer
SCI_RxError_t SCIx_GetBuffer (unsigned char *PtrTo-
Buffer, unsigned char NbOfBytes)
Receives a number of data bytes and stores them in the
user buffer. The reception stops as soon as an error oc-
curs and error status is returned. The data reception is
controlled by polling.
*PtrtoBuffer
Start address of the user buffer
NbOfBytes
Total number of bytes to be received
SCI_NOISE_ERR
Noise error occurred during transmission.
SCI_OVERRUN_ERR
Overrun error occurred during reception
SCI_FRAMING_ERR
Framing error occurred during reception
SCI_PARITY_ERR
Parity error occurred during reception
SCI_RECEIVE_OK
Error free reception
1.The SCIx_Mode must have been called.
2.You must select Polling reception mode in
ST7lib_Config.h
None
SCIx_GetBuffer (Interrupt driven mode)
Function Descriptions
45/235