ST7FLITE29F2M6TR STMicroelectronics, ST7FLITE29F2M6TR Datasheet - Page 188

• Manufacturer Part Number: ST7FLITE29F2M6TR
• Description: IC MCU 8BIT 8K FLASH 20-SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE29F2M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLIT2-COS/COM, ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel / 13 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Function Descriptions
Table 134. TBU_SetPrescCount16
Notes:
– The actual delay obtained using this function will be approximately equal to the calculated
– For best accuracy and smaller delays, it is recommended to use the TBU_SetPrescCount8
188/235
Function Name
Function Prototype
Behaviour Description
Input Parameters
Input Parameters
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
delay.
function.
TBU_SetPrescCount16
Void TBU_SetPrescCount16 (TBU_CasPresc
TBU_CasPrescvalue_P, unsigned int Counter_Value)
Selects the prescalar value for the PWMART timer and the
counter values to be loaded into the TBU and ART regis-
ters.ART counter is enabled.
TBU_CasPrescvalue_P
where P is the prescalar division factor and it can be 1, 2,
4, 8, 16, 32 ,64, 128.
Counter_value
16 bit counter value. This value can be from 0000 to
FFFFh.
None
1. TBU_Init must have been called.
2. Cascaded mode must be selected
3. You must calculate the TBU_CasPrescValue_P and
Counter_Value for the required delay.
TBU_Enable must be called immediately after this func-
tion to get more accurate delay.
None
TBU_SetPrescCount8