ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 8

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Getting Started with Tools
3 GETTING STARTED WITH TOOLS
3.1 SOFTWARE TOOLS
The library functions have been debugged with the ST7 software toolset. The ST7 software
toolset can be found on the MCU CD-ROM or can be downloaded from the ST website:
http://www.st.com/mcu
The following versions of the C compilers are used:
– METROWERKS C toolchain version 4.2.5
– COSMIC C toolchain version 4.4d
A valid license has to be purchased for Metrowerks and Cosmic compilers. Free versions with
code limitations may also be available, check the websites of the two providers for further in-
formation.
Note: Since Metrowerks was previously known as Hiware, both C compilers are compatible.
3.2 HARDWARE TOOLS
Hardware tools are not required for using the library, you can use the STVD7 simulator if it
supports the target device (check with the latest device documentation). However you can use
the following Hardware tools for development support:
3.3 TECHNICAL LITERATURE
As well as reading the ST7 device datasheet, you should also read the following documents
before using the library. All the documents and the device datasheets are available on the ST
website and on the MCU CD ROM.
ST7 Software library user manual
Application note: AN978: Key features of the STVD7 ST7 Visual debug package
Application note: AN989: Getting started with the ST7 Hiware C Toolchain
Application note: AN983: Key features of the Cosmic ST7 C- Compiler package
Application note: AN1064: Writing Optimized Hiware C Language for ST7
Application note: AN1938: Visual Develop for ST7 Cosmic C Toolset Users
Application note: AN1939: Visual Develop for ST7 Metrowerks C Toolset Users
8/235
1
– ICD based debugging tools (like InDart from Softec or R-Link ST from Raisonance)
– ST Emulators (EMU or DVP)
– ST7232x - SK/ RAIS (Starter Kit by Raisonance)
– ST evaluation boards / starter kits (for example ST7232x-EVAL)
– ST7-STICK - ST in-circuit communication kits
– ICC socket boards - these complement any tool that has ICC programming capabilities
– Third party emulators (from Hitex or iSYSTEM)
– Engineering Programming Board (EPB) or Gang Programmer
(like ST7-STICK, InDART, R-Link, DVP, EMU, etc.)