ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 126

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Function Descriptions
Table 79. TIMERx_OCMP_Mode
Note: If you select Forced compare mode, the input parameter 2 will not affect the output
126/235
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Input Parameter 3
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
waveform and hence you can pass any value between 0x0000 to 0xFFFF.
TIMERx_OCMP_Mode
Void TIMERx_OCMP_Mode(Timer_Compare CMP, un-
signed int OCR_VALUE, Timer_Olevel OUTPUT_L)
Configures the timer in Output compare or Forced compare
mode, depending upon the input parameter passed. This
function should be called twice in order to get both the com-
pare mode OCMP1 & OCMP2.
TIMER_OCMP_X
X=1, output compare1 mode is selected.
X=2, output compare2 mode is selected.
TIMER_FORCDCMP_Y
Y = 1, Forced compare 1 is selected.
Y = 2, Forced compare 2 is selected.
OCR_VALUE
You can select this value from 0x0000 to 0xFFFF.
TIMER_OUTPUT_F
A low level is reflected at the output compare pin after suc-
cessful comparison.
TIMER_OUTPUT_R
A high level is reflected at the output compare pin after suc-
cessful comparison.
None
Timer correctly initialized.
None
Timer starts functioning in either of the above selected
mode and compare flag is set whenever the compare oc-
curs.
None