MC68HC908JB8JPE Freescale Semiconductor, MC68HC908JB8JPE Datasheet - Page 153

• Manufacturer Part Number: MC68HC908JB8JPE
• Description: IC MCU FLASH 8BIT 8K 20-DIP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908JB8JPE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 3MHz
• Connectivity: USB
• Peripherals: LVD, POR, PWM
• Number Of I /o: 13
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Controller Family/series: HC08
• No. Of I/o's: 13
• Ram Memory Size: 256Byte
• Cpu Speed: 3MHz
• No. Of Timers: 1
• Embedded Interface Type: USB
• Rohs Compliant: Yes
• Processor Series: HC08JB
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: USB
• Maximum Clock Frequency: 3 MHz
• Number Of Programmable I/os: 37
• Number Of Timers: 2
• Operating Supply Voltage: 4 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• Development Tools By Supplier: FSICEBASE, DEMO908GZ60E, M68EML08GZE, KITUSBSPIDGLEVME, KITUSBSPIEVME, KIT33810EKEVME
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

9.8.11 USB Status Register 1
MC68HC908JB8•MC68HC08JB8•MC68HC08JT8 — Rev. 2.3
Freescale Semiconductor
Address:
R2SEQ — Endpoint 2 Receive Sequence Bit
TXACK — ACK Token Transmit Bit
TXNAK — NAK Token Transmit Bit
TXSTL — STALL Token Transmit Bit
RP2SIZ3–RP2SIZ0 — Endpoint 2 Receive Data Packet Size
Reset:
Read:
Write:
This read-only bit indicates the type of data packet last received for
endpoint 2 (DATA0 or DATA1).
This read-only bit indicates that an ACK token has been transmitted.
This bit is updated at the end of the EP0 data transmission.
This read-only bit indicates that a TXNAK token has been transmitted.
This bit is updated at the end of the EP0 data transmission.
This read-only bit indicates that a STALL token has been transmitted.
This bit is updated at the end of the EP0 data transmission.
These read-only bits store the number of data bytes received for the
last OUT transaction for endpoint 2.
1 = DATA1 token received in last endpoint 2 receive
0 = DATA0 token received in last endpoint 2 receive
1 = Last token transmitted for endpoint 0 was an ACK token
0 = Last token transmitted for endpoint 0 was not an ACK token
1 = Last token transmitted for endpoint 0 was a NAK token
0 = Last token transmitted for endpoint 0 was not a NAK token
1 = Last token transmitted for endpoint 0 was a STALL token
0 = Last token transmitted for endpoint 0 was not a STALL token
R2SEQ
$003E
Bit 7
Universal Serial Bus Module (USB)
U
Figure 9-25. USB Status Register 1 (USR1)
= Unimplemented
TXACK
6
0
TXNAK
5
0
TXSTL
4
0
RP2SIZ3 RP2SIZ2 RP2SIZ1 RP2SIZ0
Universal Serial Bus Module (USB)
U
3
U = Unaffected by reset
U
2
U
1
Technical Data
I/O Registers
Bit 0
U
153