Z8F0411HH020SG Zilog, Z8F0411HH020SG Datasheet - Page 92

• Manufacturer Part Number: Z8F0411HH020SG
• Description: IC ENCORE MCU FLASH 4K 20SSOP
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F0411HH020SG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 11
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 20-SSOP
• Controller Family/series: Z8
• No. Of I/o's: 11
• Ram Memory Size: 1KB
• Cpu Speed: 20MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Processor Series: Z8F041xx
• Core: eZ8
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 11
• Number Of Timers: 2
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• For Use With: 770-1002 - ISP 4PORT ZILOG Z8 ENCORE! MCU269-4643 - KIT DEV Z8 ENCORE XP 28-PIN269-4630 - DEV KIT FOR Z8 ENCORE 8K/4K269-4629 - KIT DEV Z8 ENCORE XP 28-PIN269-4628 - KIT DEV Z8 ENCORE XP 8-PIN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4101; Z8F0411HH020SG

Table 41. Timer 0–1 Reload High Byte Register (TxRH)
Table 42. Timer 0–1 Reload Low Byte Register (TxRL)
PS022517-0508
BITS
FIELD
RESET
R/W
ADDR
BITS
FIELD
RESET
R/W
ADDR
Timer Reload High and Low Byte Registers
Timer 0–1 PWM High and Low Byte Registers
7
7
TH and TL—Timer High and Low Bytes
These 2 bytes, {TMRH[7:0], TMRL[7:0]}, contain the current 16-bit timer count value.
The Timer 0–1 Reload High and Low Byte (TxRH and TxRL) Registers
16-bit reload value, {TRH[7:0], TRL[7:0]}. Values written to the Timer Reload High Byte
register are stored in a temporary holding register. When a write to the Timer Reload Low
Byte Register occurs, the temporary holding register value is written to the Timer High
Byte Register. This operation allows simultaneous updates of the 16-bit Timer Reload
value.
In COMPARE mode, the Timer Reload High and Low Byte Registers store the 16-bit
Compare value.
TRH and TRL—Timer Reload Register High and Low
These two bytes form the 16-bit Reload value, {TRH[7:0], TRL[7:0]}. This value sets the
maximum count value which initiates a timer reload to
two bytes form the 16-bit Compare value.
The Timer 0–1 PWM High and Low Byte (TxPWMH and TxPWML) registers
and
store the Capture values for the CAPTURE and CAPTURE/COMPARE modes.
Table
6
6
44) are used for Pulse-Width Modulator (PWM) operations. These registers also
5
5
4
4
F02H, F0AH
F03H, F0BH
TRH
R/W
TRL
R/W
1
1
3
3
0001H
2
2
Z8 Encore! XP
. In COMPARE mode, these
Product Specification
1
1
(Table
®
F0822 Series
0
0
41) store a
(Table 43
Timers
79