LPC3131FET180,551 NXP Semiconductors, LPC3131FET180,551 Datasheet - Page 21

• Manufacturer Part Number: LPC3131FET180,551
• Description: IC ARM9 MCU 180MHZ 180-TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC3000r

Specifications of LPC3131FET180,551

• Package / Case: 180-TFBGA
• Core Processor: ARM9
• Core Size: 32-Bit
• Speed: 180MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, UART/USART, USB OTG
• Peripherals: DMA, I²S, LCD, PWM, WDT
• Program Memory Type: ROMless
• Ram Size: 192K x 8
• Voltage - Supply (vcc/vdd): 1.1 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC31
• Core: ARM926EJ-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 192 KB
• Interface Type: I2C/I2S/UART/USB
• Maximum Clock Frequency: 180 MHz
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, KSK-LPC3131-PL
• Development Tools By Supplier: OM11028
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 4-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 568-4850 - KIT EVAL FOR LPC313X568-4062 - DEBUGGER J-LINK JTAG568-4061 - DEBUGGER U-LINK2 JTAG FOR NXP
• Number Of I /o: -
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4697; 935288014551; LPC3131FET180-S

NXP Semiconductors
LPC3130_3131
Preliminary data sheet
6.13 Multi-layer AHB
The following blocks can generate interrupts:
The multi-layer AHB is an interconnection scheme based on the AHB protocol that
enables parallel access paths between multiple masters and slaves in a system.
Multiple masters can have access to different slaves at the same time.
Figure 5
AHB masters and slaves are numbered according to their AHB port number.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Visibility of the interrupt’s request state before masking.
Support for nesting of interrupt service routines.
Interrupts routed to IRQ and to FIQ are vectored.
Level interrupt support.
NAND flash controller
USB 2.0 high-speed OTG
Event router
10-bit ADC
UART
LCD
MCI
SPI
I2C0 and I2C1 controllers
Timer0, Timer1, Timer2, and Timer3
I
I
DMA
2
2
S transmit: I2STX_0 and I2STX_1
S receive: I2SRX_0 and I2SRX_1
gives an overview of the multi-layer AHB configuration in the LPC3130/3131.
All information provided in this document is subject to legal disclaimers.
Rev. 1.04 — 27 May 2010
Low-cost, low-power ARM926EJ-S microcontrollers
LPC3130/3131
© NXP B.V. 2010. All rights reserved.
21 of 72