PIC18F4431-I/PT Microchip Technology, PIC18F4431-I/PT Datasheet - Page 189

• Manufacturer Part Number: PIC18F4431-I/PT
• Description: IC PIC MCU FLASH 8KX16 44TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4431-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 16KB (8K x 16)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 36
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: EUSART/I2C/SPI/SSP
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 4
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9-ch x 10-bit
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT44PT3 - SOCKET TRAN ICE 44MQFP/TQFPAC164305 - MODULE SKT FOR PM3 44TQFP444-1001 - DEMO BOARD FOR PICMICRO MCUAC164020 - MODULE SKT PROMATEII 44TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 17-3:
 2003 Microchip Technology Inc.
bit 7
bit 6-4
bit 3-0
PWMCON0: PWM CONTROL REGISTER 0
bit 7
Unimplemented: Read as ‘0’.
PWMEN2:PWMEN0: PWM Module Enable bits
111 =All odd PWM I/O pins enabled for PWM output
110 =PWM1, PWM3 pins enabled for PWM output.
101 =All PWM I/O pins enabled for PWM output
100 =PWM0, PWM1, PWM2, PWM3, PWM4 and PWM5 pins enabled for PWM output.
011 =PWM0, PWM1, PWM2 and PWM3 I/O pins enabled for PWM output.
010 =PWM0 and PWM1 pins enabled for PWM output.
001 =PWM1 pin is enabled for PWM output.
000 =PWM module disabled. All PWM I/O pins are general purpose I/O.
PMOD3:PMOD0: PWM Output Pair Mode bits
For PMOD0:
1 = PWM I/O pin pair (PWM0, PWM1) is in the Independent mode.
0 = PWM I/O pin pair (PWM0, PWM1) is in the Complementary mode.
For PMOD1:
1 = PWM I/O pin pair (PWM2, PWM3) is in the Independent mode.
0 = PWM I/O pin pair (PWM2, PWM3) is in the Complementary mode.
For PMOD2:
1 = PWM I/O pin pair (PWM4, PWM5) is in the Independent mode.
0 = PWM I/O pin pair (PWM4, PWM5) is in the Complementary mode.
For PMOD3
1 = PWM I/O pin pair (PWM6, PWM7) is in the Independent mode.
0 = PWM I/O pin pair (PWM6, PWM7) is in the Complementary mode.
Legend:
R = Readable bit
-n = Value at POR
Note 1: Reset condition of PWMEN bits depends on PWMPIN device configuration bit.
U-0
—
2: When PWMEN2:PWMEN0 = 101, PWM[5:0] outputs are enabled for
3: Unimplemented in PIC18F2X31 devices; maintain these bits clear.
PIC18F2X31 devices; PWM[7:0] outputs are enabled for PIC18F4X31devices.
When PWMEN2:PWMEN0 = 111, PWM outputs 1, 3 and 5 are enabled in
PIC18F2X31devices; PWM outputs 1, 3, 5 and 7 are enabled in PIC18F4X31
devices.
PWMEN2 PWMEN1 PWMEN0 PMOD3
(3)
R/W-1
:
(1)
PIC18F2331/2431/4331/4431
R/W-1
Preliminary
W = Writable bit
‘1’ = bit is set
(1)
R/W-1
(1)
(2)
(1)
R/W-0
U = Unimplemented bit, read as ‘0’
‘0’ = bit is cleared
.
(2)
.
(3)
PMOD2
R/W-0
x = bit is unknown
PMOD1
R/W-0
DS39616B-page 187
PMOD0
R/W-0
bit 0