P2CF-08-E Omron, P2CF-08-E Datasheet - Page 4

• Manufacturer Part Number: P2CF-08-E
• Description: SOCKET 8-PIN FOR H3CR-H
• Manufacturer: Omron
• Type: Socketr

Specifications of P2CF-08-E

• Number Of Positions: 8
• Mounting Type: DIN Rail
• Termination Style: Screw Terminal
• Size: 70 mm x 50 mm x 19 mm
• Socket Mounting: DIN Rail
• Socket Terminals: Screw
• Voltage Rating: 240VAC
• No. Of Pins: 8
• Accessory Type: Finger Safe Terminal
• Rohs Compliant: Yes
• Number Of Poles: 8
• Mounting Style: DIN Rail
• For Use With/related Products: Multiple Series
• For Use With: Z3000 - RELAY TIMER DGTL SPDT 12-24VDCZ2999 - RELAY TIMER DGTL SPDT 100/240VACH3CR-A8E AC100-240/DC100-125 - RELAY ANALOG SET DPDT 8PINZ2815 - RELAY REPEAT CYCLE ANALOG 30HRSZ2387 - RELAY TIMER 0-12SEC OFF-DELAYZ2386 - RELAY TIMER 0-12MIN OFF-DELAYZ2385 - RELAY REPEAT CYCLE ANALOG 30HRSZ2384 - RELAY REPEAT CYCLE ANALOG 300HRSZ2381 - RELAY ANALOG SET DPDT 8PINZ2380 - RELAY ANALOG SET DPDT 8PINZ2379 - RELAY ANALOG SET DPDT 8PINZ2382 - RELAY REPEAT CYCLE ANLG 30HRS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: P2CF-08-E; P2CF08E; Z2836

Specifications
■ Ratings
Note 1. Inrush current will flow for a short time when the power supply is turned ON. Refer to Inrush Current (Reference Values) on page 6.
Classification
Rated supply voltage
Operating voltage range
Power consumption
(See note 1.)
Mounting method
External connections
Terminal screw tightening
torque
Display
(See note 2.)
Digits
Time ranges
Timer mode
Input signals
Input method
Signal, reset, gate
Reset system
Power reset
Reset voltage
Sensor waiting time
Output modes
One-shot output time
Control output
Key protection
Memory backup
Ambient temperature
Ambient humidity
Case color
Attachments
2. The display is lit only when the power is ON.
Item
Digital timer
100 to 240 VAC (50/60 Hz), 24 VAC (50/60 Hz)/12 to 24 VDC (permissible ripple: 20% (p-p) max.)
85% to 110% rated supply voltage (12 to 24 VDC: 90% to 110%)
Approx. 6.2 VA at 264 VAC
Approx. 5.1 VA at 26.4 VAC
Approx. 2.4 W at 12 VDC
Flush mounting
Screw terminals
0.5 N·m max.
7-segment, negative transmissive LCD;
Present value:
11.5-mm-high characters,
red or green (programmable)
Set value: 6-mm-high characters, green
4 digits
9.999 s (0.001-s unit), 99.99 s (0.01-s unit), 999.9 s (0.1-s unit), 9999 s (1-s unit), 99 min 59 s (1-s unit)
999.9 min (0.1-min unit), 9999 min (1-min unit), 99 h 59 min (1-min unit), 999.9 h (0.1-h unit), 9999 h (1-h unit)
Elapsed time (Up), remaining time (Down) (selectable)
Signal, reset, gate
No-voltage input/voltage input (switchable)
No-voltage Input
ON impedance: 1 kΩ max. (Leakage current: 5 to 20 mA when 0 Ω)
ON residual voltage: 3 V max.
OFF impedance: 100 kΩ min.
Voltage Input
High (logic) level: 4.5 to 30 VDC
Low (logic) level: 0 to 2 VDC
(Input resistance: approx. 4.7 kΩ)
Minimum input signal width: 1 or 20 ms (selectable, same for all input)
Power resets (except for A-3, b-1, and F modes), external and manual reset
Minimum power-opening time: 0.5 s (except for A-3, b-1, and F mode)
10% max. of rated supply voltage
250 ms max. (Control output is turned OFF and no input is accepted during sensor waiting time.)
A, A-1, A-2, A-3, b, b-1, d, E, F, Z, ton or toff
0.01 to 99.99 s
SPDT contact output: 5 A at 250 VAC/30 VDC, resistive load (cosφ=1)
Minimum applied load: 10 mA at 5 VDC (failure level: P, reference value)
Transistor output: NPN open collector, 100 mA at 30 VDC max.
Leakage current: 0.1 mA max.
Output category according to EN60947-5-1 for Timers with Contact Outputs (AC-15; 250 V 3 A/AC-13; 250 V 5 A/
DC-13; 30 V 0.5 A)
Output category according to EN60947-5-2 for Timers with Transistor Outputs (DC-13; 30 V 100 mA)
NEMA B300 Pilot Duty, 1/4 HP 5-A resistive load at 120 VAC, 1/3 HP 5-A resistive load at 240 VAC
Yes
EEPROM (overwrites: 100,000 times min.) that can store data for 10 years min.
Operating: −10 to 55°C (−10 to 50°C if timers are mounted side by side) (with no icing or condensation)
Storage:
25% to 85%
Black (N1.5)
Waterproof packing,
flush mounting adapter,
label for DIP switch settings
−25 to 65°C (with no icing or condensation)
H5CX-A@
residual voltage: 1.5 VDC max. (Approx. 1 V)
Flush mounting, surface mounting, DIN track mounting
11-pin socket
---
7-segment, negative transmissive LCD
Present value:
11.5-mm-high characters, red
Set value: 6-mm-high characters, green
Label for DIP switch settings
H5CX-A11@
8-pin socket
Signal, reset
No-voltage Input
ON impedance: 1 kΩ max. (Leak-
age current: 5 to 20 mA when 0 Ω)
ON residual voltage: 3 V max.
OFF impedance: 100 kΩ min.
None
H5CX-L8@
H5CX-A/-L
4