DEMO9S08DZ60 Freescale Semiconductor, DEMO9S08DZ60 Datasheet - Page 9

• Manufacturer Part Number: DEMO9S08DZ60
• Description: BOARD DEMO
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S08DZ60

• Contents: Board, Cable, CD
• Processor To Be Evaluated: MC9S08DZ60
• Interface Type: RS-232, USB
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: S08D
• Kit Contents: MC9S08DZ60 Board, Software, Cables, Connectors
• Rohs Compliant: Yes
• For Use With/related Products: MC9S08DZ60
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

D E M O 9 S 0 8 D Z 6 0
BDM_PORT Header
A compatible HCS12 BDM cable can also attach to the 6-pin BDM interface header
(BDM_PORT). This header is not installed in default configuration. The figure below shows
the pin-out for the DEBUG header
Figure 1: BDM_PORT Header
POWER
The DEMO9S08DZ60 is designed to allow the user to power the board through the USB-
Multilink BDM during application development. A 2.0-mm barrel connector has been applied to
support stand-alone operation and to support LIN functionality.
powered through connector J1. This connection may also be used to supply power from the
board to external circuitry.
During application development, the board may be powered from either the USB-BDM or the
PWR connector. To utilize LIN functionality, the board must be powered from PWR connector
with a typical input voltage of +12VDC.
POWER SELECT
Power may be applied to the board through the integrated USB-Multilink BDM circuitry, a
2.0mm barrel connector, or through connector J1.
selection headers: PWR_SEL option header and the VX_EN option header.
PWR_SEL
The PWR_SEL option header selects power input either from the integrated USB-Multilink
BDM circuitry or from the on-board voltage regulator. The figure below details the PWR_SEL
header connections.
Figure 2: PWR_SEL Option Header
NOTE: This header is not installed in default configuration.
BKGD
PWR_SEL
1
2
1
3
5
3
2
4
6
GND
RESET*
VDD
CONFIGURATION
1 – 2: Selects power input from USB-ML12
2 – 3: Selects power input from on-board regulator or J1
See the HC(S)08 Reference Manual for complete
DEBUG documentation
9
Power selection is achieved using 2
The board may also be
D E C E M B E R
2 ,
2 0 0 6