KSZ8851SNL-BBE-EVAL Micrel Inc, KSZ8851SNL-BBE-EVAL Datasheet - Page 70

• Manufacturer Part Number: KSZ8851SNL-BBE-EVAL
• Description: BOARD EVAL MAC/PHY FOR KSZ8851
• Manufacturer: Micrel Inc
• Series: LinkMD®r

Specifications of KSZ8851SNL-BBE-EVAL

• Design Resources: BeagleBoard Zippy2
• Main Purpose: Interface, Ethernet Controller (PHY and MAC)
• Embedded: No
• Utilized Ic / Part: KSZ8851SNL
• Primary Attributes: 1 Port, 100BASE-TX/10BASE-T
• Secondary Attributes: SPI Interface, LinkMD Cable Diagnostics
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 576-3602; KSZ8851SNL-BBE-EVL; ZIPPY2

Additional MIB Information
August 2009
Micrel, Inc.
Offset
0x1C
0x1D
0x1E
0x1F
Example:
1. MIB Counter Read (read port 1 “Rx64Octets” counter at indirect address offset 0x0E)
In the heaviest condition, the byte counter will overflow in 2 minutes. It is recommended that the software read all
the counters at least every 30 seconds.
MIB counters are designed as “read clear”. That is, these counters will be cleared after they are read.
Counter Name
TxTotalCollision
TxExcessiveCollision
TxSingleCollision
TxMultipleCollision
Then
Write to reg. IACR (0xC8) with 0x1C0E (set indirect address and trigger a read MIB counters operation)
Read reg. IADHR (MIB counter value 31-16)
Read reg. IADLR (MIB counter value 15-0)
Table 14. Port 1 MIB Counters Indirect Memory Offsets
Description
Tx total collision, half duplex only
A count of frames for which Tx fails due to excessive collisions
Successfully Tx frames on a port for which Tx is inhibited by exactly one collision
Successfully Tx frames on a port for which Tx is inhibited by more than one collision
70
KSZ8851SNL/SNLI
M9999-083109-2.0