MAX9271GTJ+T Maxim Integrated, MAX9271GTJ+T Datasheet - Page 36

• Manufacturer Part Number: MAX9271GTJ+T
• Description: Serializers & Deserializers - Serdes 1.5Gbps 16Bit Coax/STP serializer
• Manufacturer: Maxim Integrated
• Type: Serializerr

Specifications of MAX9271GTJ+T

• Rohs: yes
• Data Rate: 1.5 Gbit/s
• Input Type: CMOS/LVCMOS
• Output Type: CML
• Number Of Inputs: 16
• Number Of Outputs: 1
• Operating Supply Voltage: 1.7 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: TQFN-32
• Maximum Operating Temperature: + 105 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT

Table 11. Startup Procedure for Image-Sensing Applications
Figure 33. State Diagram, All Applications
Maxim Integrated
NO.
—
1
3
4
5
ALL STATES
SLEEP = 1
FC connected to deserializer.
Powers up.
Writes deserializer configuration bits
and gets an acknowledge.
Writes serializer configuration bits.
Does not get an acknowledge (or
gets a dummy acknowledge) if loss-
of-lock occurred.
Enables video link by setting SEREN
= 1 (if not enabled automatically).
Cannot get an acknowledge (or gets
a dummy acknowledge) if loss-of-
lock occurred. Waits for link to be
established (~3ms).
PWDN = LOW OR
POWER-OFF
SLEEP
WAKE-UP SIGNAL
µC
POWER-DOWN
POWER-OFF
FOR > 8ms
SLEEP = 1
OR
16-Bit GMSL Serializer with Coax or
PWDN = HIGH,
POWER-ON
SLEEP = 0,
SEREN = 1
WAKE-UP
Sets all configuration inputs. If any
configuration inputs are available
on one end of the link but not on
the other, always connects that
configuration input low.
Powers up and loads default settings.
Establishes serial link.
—
Configuration changed from default
settings.
Begins serializing data.
PCLKIN RUNNING
LINK LOCKING
SLEEP = 0,
SEREN = 1,
SEREN = 0
VIDEO
SERIALIZER
SEREN = 0 OR
NO PCLKIN
VIDEO LINK
VIDEO LINK
UNLOCKED
LOCKED
POWER-ON
IDLE
CLINKEN = 0 OR
CLINKEN = 1
SEREN = 1
VIDEO LINK
OPERATING
SEREN = 0 OR
NO PCLKIN
STP Cable Drive
Sets all configuration inputs. If any
configuration inputs are available
on one end of the link but not on
the other, always connects that
configuration input low.
Powers up and loads default settings.
Locks to serial link signal.
Configuration changed from default
settings (loss-of-lock occurs if BWS or
EDC changes).
Relocks to serial link signal.
Locks to serial link signal and begins
deserializing data.
CLINKEN = 0 OR
LINK STARTED
SEREN = 1
PRBSEN = 0
PRBSEN = 1
CONFIG
DESERIALIZER
CONFIG LINK
CONFIG LINK
MAX9271
UNLOCKED
VIDEO LINK
PRBS TEST
LOCKED
CONFIG LINK
OPERATING
REGISTERS
PROGRAM
36