w83637hg Winbond Electronics Corp America, w83637hg Datasheet - Page 44

• Manufacturer Part Number: w83637hg
• Description: Winbond Lpc I/o Lpc I/o
• Manufacturer: Winbond Electronics Corp America

Configuration Register     Index 40h
Register Location:
Power on Default Value
Attribute:
Size:
Bit 7: A one restores power on default value to all registers except the Serial Bus Address register.
Bit 6: Reserced
Bit 5: Reserved
Bit 4: Reserved
Bit 3: A one disables the SMI# output without affecting the contents of Interrupt Status Registers. The
Bit 2: Reserved
Bit 1: A one enables the SMI# Interrupt output.
Bit 0: A one enables startup of monitoring operations, a zero puts the part in standby mode.
Note: The outputs of Interrupt pins will not be cleared if the user writes a zero to this location after an interrupt has occurred
unlike "INT_Clear'' bit.
This bit clears itself since the power on default is zero.
device will stop monitoring. It will resume upon clearing of this bit.
7
6
5
8 bits
40h
01h
Read/write
4
3
2
1
0
- 39 -
START
SMI#Enable
RESERVED
INT_Clear
RESERVED
RESERVED
RESERVED
INITIALIZATION
Publication Release Date: March, 2006
W83637HF/HG
Revision 1.6