AT32UC3A3128 Atmel Corporation, AT32UC3A3128 Datasheet - Page 16

• Manufacturer Part Number: AT32UC3A3128
• Manufacturer: Atmel Corporation

Specifications of AT32UC3A3128

• Flash (kbytes): 128 Kbytes
• Pin Count: 144
• Max. Operating Frequency: 66 MHz
• Cpu: 32-bit AVR
• # Of Touch Channels: 32
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 110
• Ext Interrupts: 110
• Usb Transceiver: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device + OTG
• Spi: 6
• Twi (i2c): 2
• Uart: 4
• Lin: 4
• Ssc: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Dac Channels: 2
• Dac Resolution (bits): 16
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 128
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0 to 3.6
• Operating Voltage (vcc): 3.0 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 18
• Input Capture Channels: 12
• Pwm Channels: 12
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

7.4.2 Usage
16
Flash and ISP specification
Windows will then process the installation of the driver corresponding to the ISP of the con-
nected part. Once completed, click ‘Finish’:
This installation has to be done for each new part family to use. E.g., using an AT32UC3A0512
then an AT32UC3A0256 will not require a new installation, but then connecting an
AT32UC3B0256 will.
To launch BatchISP, open a command prompt. Windows or Cygwin command prompt can be
used provided that the
Cygwin’s) environment variable.
When running BatchISP on AT32UC3xxxxx, the target part has to be specified with
at32uc3xxxxx
after
text file invoked using
BatchISP works with an internal ISP buffer per target memory. These ISP buffers can be filled
from several sources. All target operations (program, verify, read) are performed using these
buffers.
A typical BatchISP command line programming an application will look like this:
batchisp -device at32uc3a0512 -hardware usb -operation erase f memory flash
blankcheck loadbuffer uc3a0512-usart_example.elf program verify start reset 0
-operation
and the communication port with
. These commands are executed in order. BatchISP options can be placed in a
-cmdfile
bin
folder of the FLIP installation directory is in the
rather than on the command line.
-hardware usb
. Commands can then be placed
PATH
7745C–AVR32–05/09
(Windows’ or
-device