WD30-AT001 Omron, WD30-AT001 Datasheet - Page 99

• Manufacturer Part Number: WD30-AT001
• Description: REMOTE WIRELESS ANTENNA'S DNET
• Manufacturer: Omron

Specifications of WD30-AT001

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: WD30AT001

Explicit Messages Addressed to the DeviceNet Wireless Master Station
Command format
Response format
1,2,3...
"Destination node address"
"Transmission destination node address"
Specifies the wireless master station node address (NNODE) controlled by
the Explicit message.
"ServiceCode", "ClassID", "InstanceID"
These are parameters to specify command types, processing objects, and the
details of the process.
"ServiceData"
This data is set as necessary. The maximum specifiable byte is 238.
1. The issued Explicit message is normally responded to:
"No. of received bytes"
The number of bytes of the received data from the source node address and
after are responded to in hexadecimal.
"Communication source node address"
Specifies the wireless master station node address (NNODE) issued by the
command.
"ServiceCode"
If the system ends normally, the value resulting when the uppermost bit of the
ServiceCode specified by the command becomes ON is stored. Code 0004
Hex always results when an error is responded.
"ServiceData"
When a read command is issued, the read data is stored. 238 byte is the max-
imum.
Command code
Command code
28
28
01
01
Destination node address
**
00
End code
ServiceCode
00
No. of
received bytes
ClassID
Source node address
InstanceID
**
ServiceCode
Max. 238 bytes
Max. 238 bytes
ServiceData
ServiceData
Section 7-1
87