WD30-AT001 Omron, WD30-AT001 Datasheet - Page 124

• Manufacturer Part Number: WD30-AT001
• Description: REMOTE WIRELESS ANTENNA'S DNET
• Manufacturer: Omron

Specifications of WD30-AT001

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: WD30AT001

112
8-3
8-3-1
8-3-2
Wireless slave station
registration
Wireless Network Parameter Editing
Wireless Network Parameter Editing
Setting procedure flow
Setting procedure
1,2,3...
This section covers the setting procedures for wireless network configuration
parameters, such as wireless slave station registration.
The procedure for setting wireless network parameters is shown below.
The wireless slave station to be registered on the wireless network should be
registered on the wireless master station.
1. Set the wireless master station "mode select switch" to RUN.
2. Select the wireless master station to which the wireless slave station is to
3. Select "Edit Device Parameters" from "Edit" on the menu bar.
Writing to the device (wireless master station)
Wireless slave station registration
Routing path settings (* only required when setting relay stations)
Resetting the wireless master station
be registered from the "Network Configuration" window on the DeviceNet
configurator.
Depending on the type of wireless master station used, one of the following
screens is displayed.
If the wireless master station is a WD30-M or a WD30-ME, the following
screen is displayed.
Section 8-3