CC-9M-NA37-Z1-B Digi International, CC-9M-NA37-Z1-B Datasheet - Page 33

• Manufacturer Part Number: CC-9M-NA37-Z1-B
• Description: MOD 9M 64MB SDRAM 128MB FLASH 25
• Manufacturer: Digi International
• Series: -r

Specifications of CC-9M-NA37-Z1-B

• Module/board Type: Core Module
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: Networking

I2C interface
USB interface
33
C h a p t e r 1
ConnectCore 9M 2443 & Wi-9M 2443 Hardware Reference
Features:





The I2C signals clock and data are provided at the system connector.
The S3C2443 provides two USB ports. One port can only be used as host interface, the
other port can be configured either as host or device interface.
S3C2443 supports 2-port USB host interfaces as follows:




The Samsung USB 2.0 Controller is designed to aid the rapid implementation of the
USB 2.0 peripheral device. The controller supports both High and Full speed mode.
Using the standard UTMI interface and AHB interface the USB 2.0 Controller can
support up to 9 Endpoints (including Endpoint0) with programmable Interrupt, Bulk
and Isochronous transfer mode.
Features:







One USB interface is provided at the general pins of the system connector, consisting
of the data lines USBP and USBN as well as the additional signal USB_DT/PW.
SPI Protocol (ver. 2.11) compatible
8-bit Shift Register for transmit
8-bit Shift Register for receive
8-bit Prescaler logic
Polling, Interrupt, and DMA transfer mode
OHCI Rev 1.0 compatible
USB Rev1.1 compatible
Two down stream ports
Support for both LowSpeed and FullSpeed USB devices
Compliant to USB 2.0 specification
Supports FS/HS dual mode operation
EP 0 FIFO: 64 bytes
EP 1/2/3/4 FIFO: 512 bytes double buffering
EP 5/6/7/8 FIFO: 1024 bytes double buffering
Convenient Debugging
Support Interrupt, Bulk, Isochronous Transfer