MT49H8M36FM-5 Micron Technology Inc, MT49H8M36FM-5 Datasheet - Page 40

• Manufacturer Part Number: MT49H8M36FM-5
• Manufacturer: Micron Technology Inc
• Type: RLDRAMr

Specifications of MT49H8M36FM-5

• Organization: 8Mx36
• Density: 288Mb
• Address Bus: 22b
• Maximum Clock Rate: 200MHz
• Operating Supply Voltage (typ): 1.8V
• Package Type: uBGA
• Operating Temp Range: 0C to 95C
• Operating Supply Voltage (max): 1.9V
• Operating Supply Voltage (min): 1.7V
• Supply Current: 567mA
• Pin Count: 144
• Mounting: Surface Mount
• Operating Temperature Classification: Commercial
• Lead Free Status / Rohs Status: Not Compliant

AUTO REFRESH (AREF)
Figure 16:
PDF: 09005aef80a41b59/Source: 09005aef809f284b
288Mb_RLDRAM_II_CIO.Core.fm - Rev B 5/08 EN
AUTO REFRESH Command
AREF is used to perform a REFRESH cycle on one row in a specific bank. Because the row
addresses are generated by an internal refresh counter for each bank, the external
address balls are “Don’t Care.” The bank addresses must be provided during the AREF
command. The bank address is needed during the AREF command so refreshing of the
part can effectively be hidden behind commands to other banks. The delay between the
AREF command and a subsequent command to the same bank must be at least
Within a period of 32ms (
device, the RLDRAM requires 64K cycles at an average periodic interval of 0.49µs MAX
(actual periodic refresh interval is 32ms/8K rows/8 banks = 0.488µs). To improve effi-
ciency, eight AREF commands (one for each bank) can be posted to the RLDRAM at peri-
odic intervals of 3.9µs (32ms/8K rows = 3.90µs). Figure 31 on page 54 illustrates an
example of a refresh sequence.
ADDRESS
ADDRESS
BANK
WE#
REF#
CK#
CS#
CK
288Mb: x9, x18, x36 2.5V V
DON’T CARE
BA
t
REF), the entire device must be refreshed. For the 288Mb
39
Micron Technology, Inc., reserves the right to change products or specifications without notice.
EXT
, 1.8V V
DD
, HSTL, CIO, RLDRAM II
©2003 Micron Technology, Inc. All rights reserved.
Commands
t
RC.