DS1386-8-120+ Maxim Integrated Products, DS1386-8-120+ Datasheet - Page 7

• Manufacturer Part Number: DS1386-8-120+
• Description: IC TIMEKEEPER RAM 64K 32-EDIP
• Manufacturer: Maxim Integrated Products
• Type: Clock/Calendar/NVSRAMr

Specifications of DS1386-8-120+

• Memory Size: 64K (8K x 8)
• Time Format: HH:MM:SS:hh (12/24 hr)
• Date Format: YY-MM-DD-dd
• Interface: Parallel
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Through Hole
• Package / Case: 32-DIP Module (600 mil), 32-EDIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DS1386/1386P
WATCHDOG ALARM REGISTERS
Registers C and D contain the time for the watchdog alarm. The two registers contain a time count from
00.01 to 99.99 seconds in BCD. The value written into the Watchdog Alarm Registers can be written or
read in any order. Any access to Register C or D will cause the watchdog alarm to reinitialize and clears
the watchdog flag bit and the watchdog interrupt output. When a new value is entered or the Watchdog
Registers are read, the watchdog timer will start counting down from the entered value to zero. When
zero is reached, the watchdog interrupt output will go to the active state. The watchdog timer countdown
is interrupted and reinitialized back to the entered value every time either of the registers are accessed. In
this manner, controlled periodic accesses to the watchdog timer can prevent the watchdog alarm from
going to an active level. If access does not occur, countdown alarm will be repetitive. The Watchdog
Alarm Registers always read the entered value. The actual countdown register is internal and is not
readable. Writing registers C and D to 0 will disable the watchdog alarm feature.
7 of 21