M38510/20909BKA E2V, M38510/20909BKA Datasheet - Page 3

• Manufacturer Part Number: M38510/20909BKA
• Manufacturer: E2V

Specifications of M38510/20909BKA

• Lead Free Status / RoHS Status: Supplier Unconfirmed

section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of
this specification, whether or not they are listed.
specification to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
DEPARTMENT OF DEFENSE STANDARDS
http://assist.daps.dla.mil
Philadelphia, PA 19111-5094.)
cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
a manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturers list before
contract award (see 4.3 and 6.3).
as specified herein or as modified in the device manufacturer’s Quality Management (QM) plan. The
modification in the QM plan shall not affect the form, fit, or function as described herein.
be as specified in MIL-PRF-38535 and herein.
altered item drawing shall be as specified on figure 3. When required in groups A, B, or C inspection (see 4.4),
the devices shall be programmed by the manufacturer prior to test in a checkerboard pattern (a minimum of 50
percent of the total number of bits programmed) or to any altered item drawing pattern which includes at least 25
percent of the total number of bits programmed.
item drawing.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
2.2 Government documents.
2.2.1 Specifications and Standards. The following specifications and standards form a part of this
(Copies of these documents are available online at
2.3 Order of precedence. In the event of a conflict between the text of this specification and the references
3. REQUIREMENTS
3.1 Qualification. Microcircuits furnished under this specification shall be products that are manufactured by
3.2 Item requirements.
3.3 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall
3.3.1 Terminal connections. The terminal connections shall be as specified on figure 2.
3.3.2 Truth table.
3.3.2.1 Unprogrammed devices. The truth tables for unprogrammed devices for contracts involving no
3.3.2.2 Programmed devices. The truth table for programmed devices shall be as specified by the altered
MIL-PRF-38535 -
MIL-STD-883
MIL-STD-1835
or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
-
-
The individual item requirements shall be in accordance with MIL-PRF-38535 and
Integrated Circuits (Microcircuits) Manufacturing, General Specification for.
Test Method Standard for Microelectronics.
Interface Standard Electronic Component Case Outline
MIL-M-38510/209E
http://assist.daps.dla.mil/quicksearch/
3
or