KSZ8001L TR Micrel Inc, KSZ8001L TR Datasheet - Page 42

• Manufacturer Part Number: KSZ8001L TR
• Description: 10/100 BASE-TX/FX Physical Layer Transceiver With LinkMD Cable Diagnostics, Single 3.3V Supply, 48-LQFP,
• Manufacturer: Micrel Inc
• Type: Transceiverr

Specifications of KSZ8001L TR

• Protocol: MII, RMII, SMII
• Voltage - Supply: 1.8V, 3.3V
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1620 - BOARD EVALUATION FOR KSZ8001L
• Number Of Drivers/receivers: -
• Lead Free Status / Rohs Status: Compliant
• Other names: KSZ8001LTR; KSZ8001LTR

Micrel
KSZ8001
For the application where the reset circuit signal comes from another device (e.g., CPU, FPGA, etc), the following reset circuit
is recommended.
VCC
R 10K
D1
KSZ8001
CPU/FPGA
RST#
RST_OUT_n
D2
C 10uF
D1, D2: 1N4148
Recommended Circuit for Interfacing with CPU/FPGA Reset
At power-on-reset, R, C, and D1 provide the necessary ramp rise time to reset the Micrel device. The reset out
from CPU/FPGA provides warm reset after power up. It is also recommend to power up VDD core voltage earlier
than VDDIO voltage. At worst case, the both VDD core and VDDIO voltages should come up at the same time.
March 2006
Revision 1.03
42