P6021 Tektronix, P6021 Datasheet - Page 13

• Manufacturer Part Number: P6021
• Description: Test Probes 60MHZ, 250A 5 FT, w/term
• Manufacturer: Tektronix

Specifications of P6021

• Color: Black
• Equipment Type: Test Probe Set
• Accessory Type: AC Current Probe
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC current measurements

Operator Information
Description
Installation
P6021 Instruction Manual
Thank you for choosing a Tektronix current probe. This manual describes the
P6021 current probe with passive termination and provides information about
making measurements with the probe.
The P6021 current probe converts an alternating current waveform to a voltage
that can be displayed and measured on an oscilloscope display. The probe
provides accurate current measurements over a wide range of frequencies and
allows you to measure current without breaking the circuit.
The P6021 probe is compatible with general purpose oscilloscopes having a
1 MΩ input impedance. The P6021 probe comes with a passive termination that
matches oscilloscope and probe impedance, optimizes the probe performance,
and provides two sensitivity settings.
The P6021 probe comes with a 5-foot cable and termination.
This section describes both attaching the probe to an oscilloscope and using the
standard accessories with the probe.
To ensure the best performance from your probe and oscilloscope measurement
system, check that the probe and oscilloscope are appropriately matched. The
oscilloscope inputs should use BNC connectors and have an impedance of
1 MΩ.
Figure 1 shows the probe and various parts referred to in this manual.
1