SI4313-B1-FM Silicon Laboratories Inc, SI4313-B1-FM Datasheet - Page 19

• Manufacturer Part Number: SI4313-B1-FM
• Description: IC RX FSK 315-915MHZ 20VQFN
• Manufacturer: Silicon Laboratories Inc
• Series: EZRadio®r
• Type: ISM Receiverr

Specifications of SI4313-B1-FM

• Package / Case: 20-VQFN
• Mfg Application Notes: Si4313 Register Desc AppNote
• Frequency: 315MHz, 434MHz, 868MHz, 915MHz
• Sensitivity: -118dBm
• Data Rate - Maximum: 128kbps
• Modulation Or Protocol: FSK, GFSK, OOK
• Applications: Data Logging, Health Monitors, Remote Control, Weather Station
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Voltage - Supply: 1.8 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Operating Frequency: 315 MHz to 915 MHz
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Supply Current: 100 nA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Memory Size: -
• Current - Receiving: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1980-5

3.2. Operating Mode Control
There are three primary states in the Si4313 radio state machine: SHUTDOWN, IDLE, and RECEIVE. The
SHUTDOWN state is designed to completely shut down the radio to minimize current consumption. There are five
different configurations/options for the IDLE state that can be selected to optimize the Si4313 for the application
requirements.
"Register 07h. Operating Mode and Function Control 1" controls which operating mode/state is selected. The RX
state may be reached automatically from any of the IDLE states by setting the rxon bit in "Register 07h. Operating
Mode and Function Control 1". Table 10 shows each of the operating modes with the time required to reach RX
mode as well as the current consumption of each mode.
The Si4313 includes a low-power digital regulated supply (LPLDO), which is internally connected in parallel to the
output of the main digital regulator (and is available externally at the VR_DIG pin); this common digital supply
voltage is connected to all digital circuit blocks, including the digital modem, crystal oscillator, SPI, and register
space. The LPLDO has extremely low quiescent current consumption but limited current supply capability; it is
used only in the IDLE-STANDBY and IDLE-SLEEP modes.
Shut Down State
Idle States
RX State
Standby Mode
Sleep Mode
Sensor Mode
Ready Mode
Tune Mode
State Mode
SHUTDOWN
Table 10. Operating Modes Response Time
Figure 6. State Machine Diagram
Response Time to RX
*Five different options for IDLE
16.8 ms
800 µs
800 µs
800 µs
200 µs
200 µs
N/A
Rev. 1.0
IDLE*
Current in State/Mode (µA)
18.5 mA
800 µA
450 nA
8.5 mA
RX
15 nA
1 µA
1 µA
Si4313-B1
19