PIC16F877-20/P Microchip Technology, PIC16F877-20/P Datasheet - Page 644

• Manufacturer Part Number: PIC16F877-20/P
• Description: IC MCU FLASH 8KX14 EE 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F877-20/P

• Core Size: 8-Bit
• Program Memory Size: 14KB (8K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Controller Family/series: PIC16F
• No. Of I/o's: 33
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 368Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 444-1001 - DEMO BOARD FOR PICMICRO MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PICmicro MID-RANGE MCU FAMILY
32.6
32.6.1
32.6.2
DS31032A-page 32-10
MPLAB Programmer Support
PRO MATE
PICSTART
Microchip offers two levels of device programmer support. For most bench setups the PICSTART
Plus is sufficient. When true system qualification is done, the PRO MATE II should be the mini-
mum used, due to the validation of program memory at V
ability
The PRO MATE II Universal Programmer is a full-featured programmer capable of operating in
stand-alone mode as well as PC-hosted mode. PRO MATE II operates under MPLAB or as a
DOS command driven program.
The PRO MATE II has programmable V
memory at V
sages, keys to enter commands and a modular detachable socket assembly to support various
package types. In stand-alone mode the PRO MATE II can read, verify or program Baseline,
Mid-Range, and High End devices. It can also set configuration and code-protect bits in this
mode. The PRO MATE II programmer also supports Microchip’s Serial EEPROM and K
Security devices.
A separate In-Circuit Serial Programming (ICSP) module is available for volume programming in
a manufacturing environment. See the Programming module documentation for specific applica-
tion requirements.
The PICSTART Plus programmer is an easy-to-use, low-cost prototype programmer. It connects
to the PC via one of the COM (RS-232) ports. MPLAB Integrated Development Environment soft-
ware makes using the programmer simple and efficient. PICSTART Plus is not recommended for
production programming, since it does not do program memory verification at V
V
PICSTART Plus supports all Baseline, Mid-Range, and High End devices. For devices with up
more than 40 pins an adapter socket is required. DIP packages are the form factor that are
directly supported. Other package types may be supported with adapter sockets.
®
DDMAX
®
Plus Low-Cost Development Kit
II: Universal Device Programmer
.
DD
min and V
DD
max for maximum reliability. It has an LCD display for error mes-
DD
and V
PP
supplies which allows it to verify programmed
DD
min and V
1997 Microchip Technology Inc.
DD
max for maximum reli-
DDMIN
EE
L
OQ ®
and