63811-7900 Molex Inc, 63811-7900 Datasheet - Page 6
![TOOL HAND CRIMP 28-32AWG 1.25MM](/photos/9/86/98602/63811-7900_sml.jpg)
63811-7900
Manufacturer Part Number
63811-7900
Description
TOOL HAND CRIMP 28-32AWG 1.25MM
Manufacturer
Molex Inc
Series
PremiumGrade™, PanelMate™, Pico-Gold™r
Type
Crimp Toolr
Specifications of 63811-7900
Tool Type
Hand Crimper
Features
Side Entry, Ratchet
Product
Crimping, Stripping & Cutting Tools & Drills
Crimp Size
32AWG To 28AWG
Lead Free Status / RoHS Status
Not applicable / Not applicable
For Use With/related Products
Rectangular Contacts, 28-32 AWG
For Use With
WM5506TR - CONN TERM FEMALE 28-30AWG GOLD50753-8141 - CONN TERMINAL 30-32AWG CRIMP0505168041 - CONN TERM FEMALE 28-32AWG GOLDWM5506 - CONN TERM FEMALE 28-30AWG GOLD
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
063811-7900
063811-7900-E
0638117900
0638117900-E
63811-7900-E
638117900
638117900-E
WM9805
063811-7900-E
0638117900
0638117900-E
63811-7900-E
638117900
638117900-E
WM9805
Hand Crimp Tool for 1.25mm (.049”) Pitch Crimp Terminals
Doc No: ATS-638117900
Revision: B
Warranty
How to Adjust Tool Preload
This hand tool is factory preset to 25-45 LBS. preload. It may be necessary over the life of the tool to adjust tool
handle preload force. Listed below are the steps required to adjust the crimping force of the hand tool to obtain
proper crimp conditions:
1. Hold the hand tool in the palm of your hand as shown in Figure 12. Using the index finger squeeze the link
2. Rotate the setting wheel counter-clockwise (CCW) to increase handle force. The numbers will display higher.
3. Release the link to lock the setting wheel in place.
4. Check the crimp specifications or
This tool is for electrical terminal crimping
purposes only. This tool is made of the
best quality materials. All vital
components are long life tested. All tools
are warranted to be free of manufacturing
defects for a period of 30 days. Should
such a defect occur, we will repair or
exchange the tool free of charge. This
repair or exchange will not be applicable
to altered, misused, or damaged tools.
This tool is designed for hand use only.
Any clamping, fixturing, or use of handle extensions voids this warranty.
CAUTIONS:
1. Manually powered hand tools are intended for low volume or field repair. This tool is
2. Insulated rubber handles are not protection against electrical shock.
3. Wear eye protection at all times.
4. Use only the Molex terminals specified for crimping with this tool.
towards the top of the hand tool frame. This will release the preload adjustment wheel.
To decrease handle force rotate the setting wheel clockwise (CW).
conduct a pull test after tool handle
preload force is adjusted.
production use. Repetitive use of this tool should be avoided.
CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling.
Release Date: 05-31-07
Revision Date: 04-28-08
(See Figure 10)
SETTING
WHEEL
UNCONTROLLED COPY
RELEASE LEVER
RATCHET
THE HANDLE
THE LINK IN
SQUEEZE
NOT
intended for
Figure 12
TOOL IN POSITION
HOLD THE HAND
Page 6 of 8