63811-7900 Molex Inc, 63811-7900 Datasheet - Page 5

• Manufacturer Part Number: 63811-7900
• Description: TOOL HAND CRIMP 28-32AWG 1.25MM
• Manufacturer: Molex Inc
• Series: PremiumGrade™, PanelMate™, Pico-Gold™r
• Type: Crimp Toolr

Specifications of 63811-7900

• Tool Type: Hand Crimper
• Features: Side Entry, Ratchet
• Product: Crimping, Stripping & Cutting Tools & Drills
• Crimp Size: 32AWG To 28AWG
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Rectangular Contacts, 28-32 AWG
• For Use With: WM5506TR - CONN TERM FEMALE 28-30AWG GOLD50753-8141 - CONN TERMINAL 30-32AWG CRIMP0505168041 - CONN TERM FEMALE 28-32AWG GOLDWM5506 - CONN TERM FEMALE 28-30AWG GOLD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 063811-7900; 063811-7900-E; 0638117900; 0638117900-E; 63811-7900-E; 638117900; 638117900-E; WM9805

Hand Crimp Tool for 1.25mm (.049”) Pitch Crimp Terminals
Doc No: ATS-638117900
Revision: B
Right or Left Hand Operation
This hand tool has an added feature that can be converted
from a right handed application to a left handed application. It
is necessary to reverse the tooling if using the left handed
application along with the locator. Follow the steps below:
1. The locator must be removed before reversing the tooling.
2. Remove the M3 BHCS which is holding the upper tooling.
3. Flip the upper tooling to the opposite side and replace the M3 BHCS. Make sure the small markings on the
4. Do the same thing with the lower tooling and tighten the M3 screws. Be
5. Reinstall the locator by following the Instructions in the locator replacement
Maintenance
It is recommended that each operator of the tool be made aware of, and
responsible for, the following maintenance steps:
1. Remove dust, moisture, and other contaminants with a clean brush, or
2. Do not use any abrasive materials that could damage the tool.
3. Make certain all pins; pivot points and bearing surfaces are protected with
4. Wipe excess oil from hand tool, particularly from crimping area. Oil
5. When tool is not in use, keep the handles closed to prevent objects from
Miscrimps or Jams
Should this tool ever become stuck or jammed in a partially closed position,
Do Not force the handles open or closed.
pressing up on the ratchet release lever in the movable handle. See Figure 11.
front and back of the hand tool frame match up and are on the outside of the hand tool frame. See Figure 8
and 9.
sure the small markings line up.
section.
soft, lint free cloth.
a thin coat of high quality machine oil. Do not oil excessively. The tool
was engineered for durability but like any other equipment it needs cleaning and lubrication for a maximum
service life of trouble free crimping. Light oil (such as 30 weight automotive oil) used at the oil points, every
5,000 crimps or 3 months, will significantly enhance the tool life.
transferred from the crimping area onto certain terminations may affect
the electrical characteristics of an application.
becoming lodged in the crimping dies, and store the tool in a clean, dry
area.
Release Date: 05-31-07
Revision Date: 04-28-08
The tool will open easily by
UNCONTROLLED COPY
FRONT
(BOTH SIDES) LIGHT OIL
LUBRICATION POINTS
(EVERY 3 MONTHS OR
UP MARKS
MATCH
5,000 CRIMPS)
Figure 9
Figure 10
RATCHET RELEASE
LEVER
Figure 11
BACK
Page 5 of 8