63819-0100 Molex Inc, 63819-0100 Datasheet - Page 6

• Manufacturer Part Number: 63819-0100
• Description: TOOL HAND CRIMP 24-30AWG
• Manufacturer: Molex Inc
• Series: PremiumGrade™, MicroBlade™, Milli-Grid™r

Specifications of 63819-0100

• Tool Type: Hand Crimper
• Features: Side Entry, Ratchet
• Product: Crimping, Stripping & Cutting Tools & Drills
• Crimp Size: 30AWG To 24AWG
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Rectangular Contacts, 24-30 AWG
• For Use With: WM18965TR - CONN SOCKET 24-30AWG CRIMP TINWM18965CT - CONN SOCKET 24-30AWG CRIMP TINWM2139 - CONN TERM FEMALE 24-30AWG 30GOLDWM2139TR - CONN TERM FEMALE 24-30AWG 30GOLDWM1128CT - CONN TERM FEMALE 24-30AWG GOLDWM1128TR - CONN TERM FEMALE 24-30AWG GOLDWM18992 - CONN SOCKET 24-30AWG CRIMP TINWM1128 - CONN TERM FEMALE 24-30AWG CRIMP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 063819-0100; 063819-0100-P; 0638190100; 0638190100-P; 63819-0100-P; 638190100; 638190100-P; WM9020

Hand Crimp Tool for Milli-Grid™ and MicroBlade Crimp Terminal
Doc No: ATS-638190100
Revision: A
How to Adjust Tool Preload
(See Figure 12)
This hand tool is factory preset to 25-45
LBS. preload. It may be necessary over
the life of the tool to adjust tool handle
preload force. Listed below are the steps
required to adjust the crimping force of the
hand tool to obtain proper crimp
conditions:
1. Hold the hand tool in the palm of your
2. Rotate the setting wheel counter-clockwise (CCW) to increase handle force. The numbers will display higher.
3. Release the link to lock the setting wheel in place.
4. Check the crimp specifications or conduct a pull test after tool handle preload force is adjusted.
Warranty
This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All vital
components are long life tested. All tools are warranted to be free of manufacturing defects for a period of 30
days. Should such a defect occur, we will repair or exchange the tool free of charge. This repair or exchange will
not be applicable to altered, misused, or damaged tools. This tool is designed for hand use only. Any clamping,
fixturing, or use of handle extensions voids this warranty.
hand as shown in Figure 12. Using
the index finger squeeze the link
towards the top of the hand tool
frame. This will release the preload adjustment wheel.
To decrease handle force rotate the setting wheel clockwise (CW).
CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling.
Release Date: 11-26-07
Revision Date: 11-26-07
SETTING
WHEEL
UNCONTROLLED COPY
RELEASE LEVER
RATCHET
THE HANDLE
THE LINK IN
SQUEEZE
Figure 12
TOOL IN POSITION
HOLD THE HAND
Page 6 of 8