63819-0100 Molex Inc, 63819-0100 Datasheet - Page 5

• Manufacturer Part Number: 63819-0100
• Description: TOOL HAND CRIMP 24-30AWG
• Manufacturer: Molex Inc
• Series: PremiumGrade™, MicroBlade™, Milli-Grid™r

Specifications of 63819-0100

• Tool Type: Hand Crimper
• Features: Side Entry, Ratchet
• Product: Crimping, Stripping & Cutting Tools & Drills
• Crimp Size: 30AWG To 24AWG
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Rectangular Contacts, 24-30 AWG
• For Use With: WM18965TR - CONN SOCKET 24-30AWG CRIMP TINWM18965CT - CONN SOCKET 24-30AWG CRIMP TINWM2139 - CONN TERM FEMALE 24-30AWG 30GOLDWM2139TR - CONN TERM FEMALE 24-30AWG 30GOLDWM1128CT - CONN TERM FEMALE 24-30AWG GOLDWM1128TR - CONN TERM FEMALE 24-30AWG GOLDWM18992 - CONN SOCKET 24-30AWG CRIMP TINWM1128 - CONN TERM FEMALE 24-30AWG CRIMP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 063819-0100; 063819-0100-P; 0638190100; 0638190100-P; 63819-0100-P; 638190100; 638190100-P; WM9020

Hand Crimp Tool for Milli-Grid™ and MicroBlade Crimp Terminal
Doc No: ATS-638190100
Revision: A
Right or Left Hand Operation
This hand tool has an added feature that can be
converted from a right handed application to a left
handed application. It is necessary to reverse the
tooling if using the left handed application along with
the locator. Follow the steps below:
1. The locator must be removed before reversing the
2. Remove the M3 BHCS which is holding the upper tooling.
3. Flip the upper tooling to the opposite side and replace the M3 BHCS. Make sure the small markings on the
4. Do the same thing with the lower tooling and tighten the M3 screws. Be sure the small markings line up.
5. Reinstall the locator by following the Instructions in the locator replacement section.
Maintenance
It is recommended that each operator of the tool be made aware of, and
responsible for, the following maintenance steps:
1. Remove dust, moisture, and other contaminants with a clean brush, or
2. Do not use any abrasive materials that could damage the tool.
3. Make certain all pins; pivot points and bearing surfaces are protected
4. Wipe excess oil from hand tool, particularly from crimping area. Oil transferred from the crimping area onto
5. When tool is not in use, keep the handles closed to prevent objects from
Miscrimps or Jams
Should this tool ever become stuck or jammed in a partially closed position,
Do Not force the handles open or closed.
pressing up on the ratchet release lever in the movable handle. See Figure
11.
tooling.
front and back of the hand tool frame match up and are on the outside of the hand tool frame. See Figure 8
and 9.
soft, lint free cloth.
with a thin coat of high quality machine oil. Do not oil excessively.
The tool was engineered for durability but like any other equipment it
needs cleaning and lubrication for a maximum service life of trouble
free crimping. Light oil (such as 30 weight automotive oil) used at the
oil points, every 5,000 crimps or 3 months, will significantly enhance
the tool life.
certain terminations may affect the electrical characteristics of an
application.
becoming lodged in the crimping dies, and store the tool in a clean, dry
area.
Release Date: 11-26-07
Revision Date: 11-26-07
The tool will open easily by
UNCONTROLLED COPY
FRONT
(BOTH SIDES) LIGHT OIL
LUBRICATION POINTS
(EVERY 3 MONTHS OR
UP MARKS
MATCH
5,000 CRIMPS)
Figure 9
Figure 10
RATCHET RELEASE
LEVER
BACK
Figure 11
Page 5 of 8